| auszookers.com https://auszookers.com/forum/ |
|
| Jimny Rock Slider Dimensions/Plans https://auszookers.com/forum/viewtopic.php?f=5&t=45332 |
Page 1 of 1 |
| Author: | NickCooper [ Sun Mar 02, 2014 11:05 pm ] |
| Post subject: | Jimny Rock Slider Dimensions/Plans |
Hi, Looking at making a set of rock sliders for my Jimny and was just wondering if anyone has dimensions or plans in order to make a set. Any help with dimensions or plans would be really appreciated. Thanks Nick |
|
| Author: | Jezza86 [ Mon Mar 03, 2014 7:51 am ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
there's 2 ways of going about it, body mount mounted, or chassis mounted. i recommend going chassis mounted, having had body mounted and they cause other problems. |
|
| Author: | monley [ Mon Mar 03, 2014 9:03 am ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
viewtopic.php?f=14&t=29326 |
|
| Author: | 31zook [ Mon Mar 03, 2014 11:15 am ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
If you work out a decent way of attaching them to the chassis then let us know. I ended up welding mine on. |
|
| Author: | NickCooper [ Mon Mar 03, 2014 11:26 am ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
Jezza86 wrote: there's 2 ways of going about it, body mount mounted, or chassis mounted. i recommend going chassis mounted, having had body mounted and they cause other problems. I really like the way they have been mounted in the link Monley posted. I dont think they would cause problems. monley wrote: http://auszookers.com/forum/viewtopic.php?f=14&t=29326 I really like those sliders, might be the way I end up mounting it. Although I may make them a little bit more horizontal so they can still be used as side steps. 31zook wrote: If you work out a decent way of attaching them to the chassis then let us know. I ended up welding mine on. Seriously thinking of mounting them the same as the ones in the link that Monley posted. Thanks for your responses |
|
| Author: | 31zook [ Mon Mar 03, 2014 11:28 am ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
Monely's link to them sliders don't work btw. Thats my car before I bought it and I had to remake them due to the flex and them popping the door cards off. |
|
| Author: | NickCooper [ Mon Mar 03, 2014 11:49 am ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
Ah ok, scratch that idea then. Maybe I could just use 3 u clamps to attach it. I'll have to have a look on my Jimny though and see if I can |
|
| Author: | BlueSuzy [ Mon Mar 03, 2014 1:17 pm ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
Another one or two rails to the chassis wouldn't hurt including the bodymounts and if your running full plastics they would be off the door moulds more. I made them up high because the plastics were trashed/missing |
|
| Author: | Jezza86 [ Mon Mar 03, 2014 3:11 pm ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
http://auszookers.com/forum/viewtopic.php?f=14&t=29326 yes it did...? dunno why u cant see it BlueSuzy 's Jimny Rocksliders in Board index » Talking About Stuff » I made it and fabrication its a better way then mine which were attached like this  the BlueSuzy method is what they should have been all allong and now im annoyed that i fergot about it.... |
|
| Author: | NickCooper [ Mon Mar 03, 2014 4:22 pm ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
Jezza86 wrote: http://auszookers.com/forum/viewtopic.php?f=14&t=29326 yes it did...? dunno why u cant see it BlueSuzy 's Jimny Rocksliders in Board index » Talking About Stuff » I made it and fabrication its a better way then mine which were attached like this the BlueSuzy method is what they should have been all allong and now im annoyed that i fergot about it.... Thanks for that Jezza, looks like that'll be the way I go, I'll add two 'u' shaped clamps in the middle too for a bit extra strength. |
|
| Author: | Bugsta [ Tue Mar 11, 2014 11:34 pm ] |
| Post subject: | Re: Jimny Rock Slider Dimensions/Plans |
Mine are bolted to threaded plates (plate to plate) that are welded to the chassis. This allows easy removal and I have never stretched or stripped a bolt. Very solid. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|