| auszookers.com https://auszookers.com/forum/ |
|
| Radiator overflow bottle height https://auszookers.com/forum/viewtopic.php?f=5&t=45503 |
Page 1 of 1 |
| Author: | Blkfxx [ Tue Mar 18, 2014 11:11 am ] |
| Post subject: | Radiator overflow bottle height |
Quick question, Trying to find a spot to mount my power steering res and found it will work best where the overflow bottle is. Can I mount the overflow bottle down low or will that effect coolant getting back into the radiator? I'll grab a pic in a moment to show where I want to mount it. |
|
| Author: | Blkfxx [ Tue Mar 18, 2014 11:54 am ] |
| Post subject: | Re: Radiator overflow bottle height |
![]() ![]() ![]()
|
|
| Author: | Scrawny [ Tue Mar 18, 2014 12:25 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
It works on suction so it doesn't really matter where it's mounted |
|
| Author: | droverdave [ Tue Mar 18, 2014 12:56 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Yer as far as i understand as long as its a sealed line and the end of it is submerged in water in the overflow bottle then its all good. About the only real design issue to consider is that you can easily see the level in it. |
|
| Author: | Scrawny [ Tue Mar 18, 2014 1:00 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
What HID's are you using in the spotlights? How do they seal in the back of the light? |
|
| Author: | Blkfxx [ Tue Mar 18, 2014 1:41 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Some generic eBay ones, Round grommet in a square hole. I can grab a pic if you like? |
|
| Author: | Scrawny [ Tue Mar 18, 2014 3:33 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Na, that's cool. Sounds like the ones I stuck in mine (same lights) |
|
| Author: | killazook [ Tue Mar 18, 2014 7:05 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Is that cooler on the front of your radiator for the powersteer if so where did you get it Cheers Marvin |
|
| Author: | Blkfxx [ Tue Mar 18, 2014 7:09 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Sure is. eBay, PWR brand. |
|
| Author: | killazook [ Tue Mar 18, 2014 7:12 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Awesome thanks for that did you find you needed it or just as a precaution. |
|
| Author: | Blkfxx [ Tue Mar 18, 2014 7:28 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Just a precaution. I'm still setting up for power steering so I figured why not. I grabbed the big one in the event I can later use it to cool an auto and get a smaller one for the power steering. |
|
| Author: | BlueSuzy [ Tue Mar 18, 2014 7:40 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Another option for a ps cooler is an 'engine oil cooler' off a corolla. Many have them. Clean them out and Bobs your Aunty |
|
| Author: | killazook [ Tue Mar 18, 2014 7:47 pm ] |
| Post subject: | Re: Radiator overflow bottle height |
Thats not a bad idea thanks for that Cheers Marvin |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|