auszookers.com
https://auszookers.com/forum/

jimny arb mounting help
https://auszookers.com/forum/viewtopic.php?f=5&t=45563		 Page 1 of 1
Author:  Wolf [ Mon Mar 24, 2014 3:00 pm ]
Post subject:  jimny arb mounting help
Could some one please sgow me a photo of the bar brackets on their car?ones that are 05 up,

Cheers

Wolf
Author:  Scorpion0476 [ Mon Mar 24, 2014 3:21 pm ]
Post subject:  Re: jimny arb mounting help
Hey Wolf,

'08 Jimny with Steel ARB Winch Bar.

Excuse the shoddy pics. Taken on my ipotato just then....anyway

Looking from the winch to the drivers side.
Image

Drivers side looking towards winch.
Image

Passenger side looking towards winch.
Image

Passenger sides lower attach point is the roundbar tiedown point,


Hope this helps.

Scorp
Author:  Wolf [ Mon Mar 24, 2014 5:01 pm ]
Post subject:  Re: jimny arb mounting help
Thanks man!, so its bolted into the chassis?
Author:  Scorpion0476 [ Mon Mar 24, 2014 5:23 pm ]
Post subject:  Re: jimny arb mounting help
Mounting plates have the two side bolts through the chassis extension then the extended pieces to the tiedown points.
Then the bar is bolted to the plates as well as the 4 bolts at the front of the chassic extensions.
Author:  tim80z [ Wed Mar 26, 2014 6:37 pm ]
Post subject:  Re: jimny arb mounting help
This thread may be of interest: http://auszookers.com/forum/viewtopic.php?f=1&t=22723

- Tim.
Author:  Wolf [ Wed Mar 26, 2014 8:10 pm ]
Post subject:  Re: jimny arb mounting help
Thanks tim, didn't notice that cutout difference, looks like new bar for me anyways
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/