| Author |
Message |
Bennis
Joined: Tue Jun 26, 2012 10:45 pm Posts: 40
Vehicle: 1.6 Vitara jlx
|
 Posted: Mon Mar 31, 2014 7:55 pm |
|
|
Hey guys
I have a 95 LWB Vitara and am torn between both lift and tyre choice.
I was originally considering a 2" lift and 30x9.5 tyres, but everyone seems to run atleast a 3" lift with these tyres.
Is there anyone out there running 30s with a 2" lift and no issues or are 235s the limit.
I am not interested in a body lift, just suspension lift.
Cheers
|
|
|
|
 |
shandy92

az supporter
Joined: Tue Nov 25, 2008 10:30 pm Posts: 5066 Location: perth, Australia
|
 Posted: Tue Apr 01, 2014 10:30 pm |
|
|
Can be done with 2", you might need to changed ur bumpstops (screw in extensions avail) How big they are depends on what rims you use.
|
|
|
|
 |
Reubs
Joined: Wed Sep 09, 2009 11:30 pm Posts: 1522 Location: Brisbane
Vehicle: SJ80, SE416
|
 Posted: Tue Apr 01, 2014 11:24 pm |
|
|
To properly clear 235/75r15 on an SE series Vit you will need bump stop spacing and adjustment of the steering stops as a minimum. Lift alone will not do the job.
|
|
|
|
 |
SierraDan

az supporter
Joined: Fri Feb 04, 2011 10:55 pm Posts: 9348 Location: Newcastle
Vehicle: G13BB Jimny
|
 Posted: Wed Apr 02, 2014 4:20 am |
|
|
I have 235's on mine with none of the above ^
_________________ mlm
|
|
|
|
 |
got_bar_work
Joined: Sat May 15, 2010 8:30 pm Posts: 2214 Location: Brisbane
Vehicle: SQ625
|
 Posted: Wed Apr 02, 2014 12:14 pm |
|
|
I have 31 with bumpstop spacing
|
|
|
|
 |
taszooker
Joined: Mon Feb 10, 2014 7:06 pm Posts: 27
Vehicle: 1996 Vitara LWB
|
 Posted: Wed Apr 02, 2014 3:58 pm |
|
|
Im running 235/75/15 M/T's with no spacers or suspension changes. I haven't been off road yet, but I do get rubbing on full lock (only) in reverse. I would go with the 2" lift minimum, and the spacer would make a difference off road for sure.
|
|
|
|
 |
pezz

az supporter
Joined: Fri May 15, 2009 11:30 pm Posts: 2108 Location: western vic
Vehicle: sj51
|
 Posted: Wed Apr 02, 2014 4:06 pm |
|
|
i think the question here should be... how much bumpstop do i need to add to run "X" size tyres and will i need to trim anything
spring lift alone wont stop tyres rubbing... when the suspension cycles it will still move through the standard range and stil rub... you want to use bumpstops and triming to eliminate rubbing, then figure out how much up travel you want and order springs and shocks to suit
|
|
|
|
 |
got_bar_work
Joined: Sat May 15, 2010 8:30 pm Posts: 2214 Location: Brisbane
Vehicle: SQ625
|
 Posted: Thu Apr 03, 2014 9:13 am |
|
|
40 mm bs spacer will clear the back of a lwb with short shocks around 500ish With 640 long shocks I needed 70mm
|
|
|
|
 |
|