| auszookers.com https://auszookers.com/forum/ |
|
| G13BA Rebuild https://auszookers.com/forum/viewtopic.php?f=5&t=45642 |
Page 1 of 1 |
| Author: | maxtest [ Sat Mar 29, 2014 9:06 pm ] |
| Post subject: | G13BA Rebuild |
So my sierra has a lot of the milky stuff under the oil cap. Am pulling it down tomorrow to find pith wether it is a headgasket or crack somewhere. If it is the gasket I will be replacing it as I have done it on my old sierra. If the block is cracked what could I expect to pay for a shop to possibly supply and fit a G16a. I would do it myself but don't have time at the moment. Thanks |
|
| Author: | alien [ Sun Mar 30, 2014 2:20 pm ] |
| Post subject: | Re: G13BA Rebuild |
with the g16, the A = Alright... the B = Brilliant. Go for a g16b (well, EFI g16... some are still g16a but EFI). If its a fully rebuilt engine supplied and fitted by a shop though you're looking at a fair few grand. |
|
| Author: | Reubs [ Sun Mar 30, 2014 5:54 pm ] |
| Post subject: | Re: G13BA Rebuild |
maxtest wrote: what could I expect to pay for a shop to possibly supply and fit a G16a. I would do it myself but don't have time at the moment. Budget for $3000 minimum. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|