| auszookers.com https://auszookers.com/forum/ |
|
| Question regarding 40-50mm lift on GV https://auszookers.com/forum/viewtopic.php?f=5&t=45671 |
Page 1 of 1 |
| Author: | mudmav [ Mon Mar 31, 2014 5:36 pm ] |
| Post subject: | Question regarding 40-50mm lift on GV |
Hey guys if I lift my GV 40-50 mm would it still benefit from fitting diff drops and pan hard relocation bracket, or is this a waste of time?? |
|
| Author: | alexxx [ Mon Mar 31, 2014 6:56 pm ] |
| Post subject: | Re: Question regarding 40-50mm lift on GV |
I haven't bothered and it has held up fine. Depends how hard you wheel it. If its hard...then I would do it. |
|
| Author: | Built4thrashing [ Mon Mar 31, 2014 7:04 pm ] |
| Post subject: | Re: Question regarding 40-50mm lift on GV |
it would benefit greatly but is not a must do. CV's will last longer with diff drops. Panhard bracket will center rear diff back under the car and improve handleing. |
|
| Author: | Chop [ Mon Mar 31, 2014 7:05 pm ] |
| Post subject: | Re: Question regarding 40-50mm lift on GV |
I've never put diff drop brackets in mine, mine has held up fine up front. But the panard relocator stopped rubbing on the one side in the rear on articulation. |
|
| Author: | zoukshin [ Tue Apr 01, 2014 10:55 am ] |
| Post subject: | Re: Question regarding 40-50mm lift on GV |
for 2" or less, it is not required. nice to have still. been running mine with 40mm lift without diff drops, s'been fine for more than a year now. (I don't wheel too hard anyway) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|