| auszookers.com https://auszookers.com/forum/ |
|
| Noisy Tappets after Rebuild (1300) https://auszookers.com/forum/viewtopic.php?f=5&t=45793 |
Page 1 of 1 |
| Author: | maxtest [ Tue Apr 08, 2014 4:35 pm ] |
| Post subject: | Noisy Tappets after Rebuild (1300) |
Just rebuilt my sierra after blowing a headgasket and having milky stuff everywhere. I have checked and adjusted tappets twice both when got and cold. And have done 2 oil and filter changes but they are still very noisy. Any suggestions ? They are all within spec. I will be doing another oil flush today |
|
| Author: | want33s [ Tue Apr 08, 2014 5:14 pm ] |
| Post subject: | Re: Noisy Tappets after Rebuild (1300) |
If you have already done 2 oil changes then a 3rd won't help noisy rockers. Engine Hot Intake ........................................ .009-.011 (.23-.28mm) Exhaust ....................................... .010-.012 (.25-.30mm) Measure between rocker and valve tip, not between rocker and cam lobe. |
|
| Author: | Built4thrashing [ Tue Apr 08, 2014 6:46 pm ] |
| Post subject: | Re: Noisy Tappets after Rebuild (1300) |
^^^^^^ what he said |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|