Including the t/c as requested , just happen to have one sitting in the shed and it was even accessible
.
| auszookers.com https://auszookers.com/forum/ |
|
| length of motor and gearbox. https://auszookers.com/forum/viewtopic.php?f=5&t=45812 |
Page 1 of 1 |
| Author: | zooky08 [ Wed Apr 09, 2014 7:11 pm ] |
| Post subject: | length of motor and gearbox. |
Does anyone no the length of a g16b with a auto and transfer case adapted to it is.from crank pully to output of a vitara tc. Cheers |
|
| Author: | zooky08 [ Thu Apr 10, 2014 1:06 pm ] |
| Post subject: | Re: length of motor and gearbox. |
Anyone know? or know we're I could find any info. |
|
| Author: | tanshi [ Thu Apr 10, 2014 1:09 pm ] |
| Post subject: | Re: length of motor and gearbox. |
so you want a length of a g16, autobox with a sierra transfer case? |
|
| Author: | tanshi [ Thu Apr 10, 2014 1:10 pm ] |
| Post subject: | Re: length of motor and gearbox. |
or standard vitara measurment |
|
| Author: | Teracis [ Thu Apr 10, 2014 6:28 pm ] |
| Post subject: | Re: length of motor and gearbox. |
Looks like he wants from the front of the vitara auto gearbox all the way through to the rear of a vitara transfer case. If you let everyone know what you're trying to achieve with this information we can probably also point you in the direction of some useful information. |
|
| Author: | chris77 [ Thu Apr 10, 2014 7:14 pm ] |
| Post subject: | Re: length of motor and gearbox. |
Best I can do is a G16a 16v with AW4 auto , from dual front crank pulley to rear output is 1470mm . Cheers Chris |
|
| Author: | zooky08 [ Thu Apr 10, 2014 8:21 pm ] |
| Post subject: | Re: length of motor and gearbox. |
I thought it was clear in my first post. Roughly how long is it from front of the g16b to the output of the vitara transfer case. . So that g16b engine, aw4 auto and vitara transfer case. I would like a rough measurement so I know we're to position it on a chassis I have made. |
|
| Author: | Blkfxx [ Thu Apr 10, 2014 8:25 pm ] |
| Post subject: | Re: length of motor and gearbox. |
zooky08 wrote: I thought it was clear in my first post. Your first post used this word.. zooky08 wrote: Does anyone no the length of a g16b with a auto and transfer case adapted to it is.from crank pully to output of a vitara tc. Cheers Which is why I am guessing people were confused. |
|
| Author: | zooky08 [ Thu Apr 10, 2014 8:28 pm ] |
| Post subject: | Re: length of motor and gearbox. |
My bad |
|
| Author: | zooky08 [ Thu Apr 10, 2014 9:40 pm ] |
| Post subject: | Re: length of motor and gearbox. |
chris77 wrote: Best I can do is a G16a 16v with AW4 auto , from dual front crank pulley to rear output is 1470mm . Cheers Chris That's just aw4? No tc? |
|
| Author: | chris77 [ Fri Apr 11, 2014 3:32 pm ] |
| Post subject: | Re: length of motor and gearbox. |
Including the t/c as requested , just happen to have one sitting in the shed and it was even accessible .
|
|
| Author: | zooky08 [ Fri Apr 11, 2014 5:13 pm ] |
| Post subject: | Re: length of motor and gearbox. |
Sweet thanks mate |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|