lump_a_charcoal wrote:
Just get a big hammer and wail on it until it is flush!
BFH fixes eveything
| auszookers.com https://www.auszookers.com/forum/ |
|
| rear wheel bearing https://www.auszookers.com/forum/viewtopic.php?f=5&t=4582 |
Page 1 of 1 |
| Author: | Damo [ Tue Apr 14, 2009 2:18 pm ] |
| Post subject: | rear wheel bearing |
This is a really bad pic (sorry!) of the stock axle shaft and bearing sans backing plate. See how the bearing sits proud of the diff housing flange? Is that normal? I think it is, there seems to be a bit of a recess in the stock backing plate to allow for that, I just want to be sure that's all. |
|
| Author: | steve [ Tue Apr 14, 2009 2:28 pm ] |
| Post subject: | Re: rear wheel bearing |
the pic is a bit faint (not there at all?) yeah the bearing sits out a bit i seem to remember |
|
| Author: | Damo [ Tue Apr 14, 2009 2:31 pm ] |
| Post subject: | Re: rear wheel bearing |
Oops, pic was a bit big, haad to resize it. |
|
| Author: | Scrawny [ Tue Apr 14, 2009 2:33 pm ] |
| Post subject: | Re: rear wheel bearing |
Yeah, pretty sure they sit slightly proud |
|
| Author: | Damo [ Tue Apr 14, 2009 2:37 pm ] |
| Post subject: | Re: rear wheel bearing |
I should probably measure the thickness of the bearing and the depth of the housing where the bearing sits. I assume the bearing sits all the way down onto the seat in the bottom of that recess. |
|
| Author: | Scrawny [ Tue Apr 14, 2009 2:43 pm ] |
| Post subject: | Re: rear wheel bearing |
Yeah, it should bottom out on that lip. |
|
| Author: | Zook_Fan [ Tue Apr 14, 2009 2:46 pm ] |
| Post subject: | Re: rear wheel bearing |
both my rears had this |
|
| Author: | Damo [ Tue Apr 14, 2009 4:42 pm ] |
| Post subject: | Re: rear wheel bearing |
Made some measurements. The depth of the recess in the housing is 14mm, width of the bearing is 17mm, so the outer edge of the bearing should side proud of the flange by 3mm. |
|
| Author: | joeblow [ Tue Apr 14, 2009 5:25 pm ] |
| Post subject: | Re: rear wheel bearing |
yes thats normal damo. had some more plates cut ans will be in the mail this week. |
|
| Author: | Damo [ Tue Apr 14, 2009 5:29 pm ] |
| Post subject: | Re: rear wheel bearing |
joeblow wrote: yes thats normal damo. had some more plates cut ans will be in the mail this week.
Was having kittens, though I had a stuffed housing or something!!! Thanks Joe, should be able to get this baby back together soon! |
|
| Author: | lump_a_charcoal [ Tue Apr 14, 2009 9:17 pm ] |
| Post subject: | Re: rear wheel bearing |
Just get a big hammer and wail on it until it is flush! |
|
| Author: | brendan [ Tue Apr 14, 2009 9:22 pm ] |
| Post subject: | Re: rear wheel bearing |
lump_a_charcoal wrote: Just get a big hammer and wail on it until it is flush!
BFH fixes eveything
|
|
| Author: | Damo [ Tue Apr 14, 2009 11:26 pm ] |
| Post subject: | Re: rear wheel bearing |
Well that's what I was going to do, but it's lucky i didnt huh 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|