Have a read through here mate
viewtopic.php?t=1108
| auszookers.com https://auszookers.com/forum/ |
|
| Spotlight wiring with Carling switch https://auszookers.com/forum/viewtopic.php?f=5&t=45836 |
Page 1 of 1 |
| Author: | honour [ Sat Apr 12, 2014 11:31 am ] |
| Post subject: | Spotlight wiring with Carling switch |
Hey guys! Sorry to start a new thread regarding light wiring - but I cannot find anything regarding wiring with a Carling switch. So - at the moment I have a set of 7" HID's mounted and wired to a generic rocker switch in my 2002 Jimny. Wired so they can only be operated upon accessories power, and switchable independent of the headlights. What I really want to do is wire them to the Carling switch, then triggered by the high beams (relay in line of course). Has anyone got a brief explanation / diagram of the process of wiring here? Thanks heaps guys! Scott. |
|
| Author: | jimny_timmy [ Sat Apr 12, 2014 12:29 pm ] |
| Post subject: | Re: Spotlight wiring with Carling switch |
Have a read through here mate viewtopic.php?t=1108 |
|
| Author: | honour [ Sat Apr 12, 2014 1:03 pm ] |
| Post subject: | Re: Spotlight wiring with Carling switch |
Thanks Timmy. Had a look through that a few times before but couldn't see much regarding Carling switches. Definitely a lot of useful info though. Thanks mate. |
|
| Author: | suzukiboy [ Sat Apr 12, 2014 1:23 pm ] |
| Post subject: | Re: Spotlight wiring with Carling switch |
The electrician that did mine fitted diodes to the relay. |
|
| Author: | honour [ Sat Apr 12, 2014 2:54 pm ] |
| Post subject: | Re: Spotlight wiring with Carling switch |
So. Im going to reveal my ignorance here. Do I really need a relay in line? Is there any reason this wouldn't work?  Be gentle.. Haha |
|
| Author: | honour [ Sat Apr 12, 2014 4:25 pm ] |
| Post subject: | Re: Spotlight wiring with Carling switch |
Or alternatively, with the relays - 
|
|
| Author: | Scrawny [ Sat Apr 12, 2014 7:00 pm ] |
| Post subject: | Re: Spotlight wiring with Carling switch |
Yes, you definitely need relays! The load is too great for the switch alone |
|
| Author: | honour [ Sat Apr 12, 2014 11:06 pm ] |
| Post subject: | Re: Spotlight wiring with Carling switch |
Cool. Thanks mate. I think I have it sorted - Just need to fix up the relay order in the diagram above. But should be all good! |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|