auszookers.com
https://auszookers.com/forum/

Vitara Power steering pump banjo bolt size?
https://auszookers.com/forum/viewtopic.php?f=5&t=45904		 Page 1 of 1
Author:  Blkfxx [ Wed Apr 16, 2014 7:08 pm ]
Post subject:  Vitara Power steering pump banjo bolt size?
I did post this in the power steer install thread.

Does anyone know what size the banjo bolt is on the pump? As I have misplaced mine.
Author:  buzbox [ Wed Apr 16, 2014 7:20 pm ]
Post subject:  Re: Vitara Power steering pump banjo bolt size?
I did see that you can get a replacement off lowrange, but obviously Pirtek is quicker..

If I don't have a "memory failure" I'll measure it tomorrow.
Author:  Blkfxx [ Tue Apr 29, 2014 8:48 am ]
Post subject:  Re: Vitara Power steering pump banjo bolt size?
Bump :D
Author:  jdk81 [ Tue Apr 29, 2014 2:41 pm ]
Post subject:  Re: Vitara Power steering pump banjo bolt size?
I hope this is enough info

external diam 16mm
int diam 10mm

13mm shank (from base of bolt head to start of thread)
30mm long over all (shank and thread)

22mm bolt head
7mm thick bolt head

4 holes 6mm diam (2 holes straight through)
2 at 7mm from base of bolt
2 at 10mm from base of bolt

using 2 x 2mm thick copper washers
Author:  Blkfxx [ Tue Apr 29, 2014 4:44 pm ]
Post subject:  Re: Vitara Power steering pump banjo bolt size?
Wicked! jdk81 to the rescue once again, Cheers mate.

Hopefully with that info and the pump in hand I'll be able to get a replacement.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/