| auszookers.com https://auszookers.com/forum/ |
|
| Manual to auto https://auszookers.com/forum/viewtopic.php?f=5&t=45948 |
Page 1 of 1 |
| Author: | Kerrod [ Mon Apr 21, 2014 7:32 pm ] |
| Post subject: | Manual to auto |
So I run a g16b-5speed manual and vitara transfer in my sierra and it mounted by the mounts on the motor and the mount between the gearbox and transfer. If I was to change the manual box to a 3 speed auto would these mounts change? Thanks kerrod |
|
| Author: | Gwagensteve [ Mon Apr 21, 2014 7:43 pm ] |
| Post subject: | Re: Manual to auto |
You can keep the stock gearbox crossmember with a 3 speed. Search for the trolley tug build in the rigs section - there's photos. Steve. |
|
| Author: | Kerrod [ Mon Apr 21, 2014 8:11 pm ] |
| Post subject: | Re: Manual to auto |
Thanks mate, I still run the whole vitara transfer, will the transfer bolt on to the auto? Do they run the same transfer? |
|
| Author: | Gwagensteve [ Mon Apr 21, 2014 8:25 pm ] |
| Post subject: | Re: Manual to auto |
Ah, ok. Yes, transfer is the same. |
|
| Author: | Kerrod [ Mon Apr 21, 2014 8:45 pm ] |
| Post subject: | Re: Manual to auto |
Awsome yea what I was tryin to work out is a manual box the same length as a 3speed auto |
|
| Author: | Gwagensteve [ Tue Apr 22, 2014 9:11 am ] |
| Post subject: | Re: Manual to auto |
IIRC yes for a three speed. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|