| auszookers.com https://auszookers.com/forum/ |
|
| Power steering box not fitting. https://auszookers.com/forum/viewtopic.php?f=5&t=45967 |
Page 1 of 1 |
| Author: | shayno [ Wed Apr 23, 2014 8:18 am ] |
| Post subject: | Power steering box not fitting. |
Anyone id this power steering box? Bought a g16b that came out of a sierra with the power steering attached but it was fitted using a modified chassis rail instead of the ben t wedge. I bought the kit and the bolts are in a similar pattern but look to be about 15mm out?  Sorry about the pic quality Sent from my SM-N9005 using Tapatalk |
|
| Author: | rockcrawlerdude [ Wed Apr 23, 2014 12:39 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
to me it dosnt look like a vitara steering box, i may be wrong though. |
|
| Author: | tanshi [ Wed Apr 23, 2014 12:41 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
yep, not a vitara box. might be cressida |
|
| Author: | BenT [ Wed Apr 23, 2014 1:28 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
Yeah, looks like it might be a Cressida steering box to me. Does it have "TOYODA" cast into it on the front? I do an adaptor plate to fit those if it is a Cressida box: 
|
|
| Author: | shayno [ Wed Apr 23, 2014 2:38 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
Shit ben I just bought the vit kit off you last week off ebay. I'll have a look to see if it's marked when I get home.how much is the cresida adaptor if I need it? Sent from my SM-N9005 using Tapatalk |
|
| Author: | shayno [ Wed Apr 23, 2014 2:49 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
Ok it doesn't have 'toyoda' stamped but it definitely looks like the Japanese Toyota characters are.  Sent from my SM-N9005 using Tapatalk |
|
| Author: | BenT [ Wed Apr 23, 2014 6:44 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
It looks like a Celica box, and the pitman arm matches the Celica style with the balljoint built in. I can do an adaptor for Celica boxes for $95 with the countersunk cap screws required to bolt it all up included. |
|
| Author: | shayno [ Wed Apr 23, 2014 6:54 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
Is there anyway to tell 100%? Just want to make sure before I order another adaptor I can't use. Wou l d you be able to tell if I posted a pic with the bolt hole measurements? Sent from my SM-N9005 using Tapatalk |
|
| Author: | shayno [ Wed Apr 23, 2014 6:56 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
Might be easier to grab a vitara box. Sent from my SM-N9005 using Tapatalk |
|
| Author: | BenT [ Wed Apr 23, 2014 7:32 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
shayno wrote: Is there anyway to tell 100%? Just want to make sure before I order another adaptor I can't use. Wou l d you be able to tell if I posted a pic with the bolt hole measurements? Yep, if you take some measurements between the bolt holes I can check. |
|
| Author: | shayno [ Wed Apr 23, 2014 7:40 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
Sweet ben thanks,I'll measure it up tomorrow. Sent from my SM-N9005 using Tapatalk |
|
| Author: | shayno [ Wed Apr 23, 2014 8:03 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
Also if it is a celica one,what pitman arm would you recommend? I just remembered the ball joint is pushed into my steering arm not the pitman. Sent from my SM-N9005 using Tapatalk |
|
| Author: | BenT [ Wed Apr 23, 2014 8:06 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
The Vitara pitman will fit and has the correct Suzuki taper for the balljoint, but is quite flat with not much drop. A Toyota Tarago pitman arm will also fit, and has similar drop to the stock Sierra pitman arm, but the taper for the balljoint is biggger, so will need a different balljoint or a tapered sleeve. |
|
| Author: | shayno [ Wed Apr 23, 2014 8:16 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
I'm only sitting at pretty much standard height so the flatter arm might not be so much of a problem? Sent from my SM-N9005 using Tapatalk |
|
| Author: | BenT [ Wed Apr 23, 2014 8:24 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
That's true. The top of the balljoint stud misses the chassis by about 10mm with the Vitara pitman from memory, so you could eyeball how different that is to your current setup and make sure the drag link isn't going to be at too much of an angle. |
|
| Author: | shayno [ Wed Apr 23, 2014 8:25 pm ] |
| Post subject: | Re: Power steering pump not fitting. |
I'll suss it all out tomorrow mate and let you know. Thanks heaps for your help. Sent from my SM-N9005 using Tapatalk |
|
| Author: | shayno [ Thu Apr 24, 2014 7:57 am ] |
| Post subject: | Re: Power steering pump not fitting. |
Ok I removed some grease and lo and behold 'toyoda' is stamped on the front. Does this narrow it down? Sent from my SM-N9005 using Tapatalk |
|
| Author: | BenT [ Thu Apr 24, 2014 10:22 am ] |
| Post subject: | Re: Power steering pump not fitting. |
Maybe put up a picture of the top just to be sure, but its definately looking like a Celica / Cressida box. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|