| auszookers.com https://auszookers.com/forum/ |
|
| Transfer case swap https://auszookers.com/forum/viewtopic.php?f=5&t=45996 |
Page 1 of 1 |
| Author: | mighty_vites [ Fri Apr 25, 2014 9:07 pm ] |
| Post subject: | Transfer case swap |
I had a crunchy moment today in my SV420 and was wonderng if the transfer from a SE416 will bolt straight up. Thanks |
|
| Author: | DarkHorse [ Sun May 04, 2014 12:10 am ] |
| Post subject: | Re: Transfer case swap |
Transfer should bolt straight to the gearbox (on the basis that my SE416 transfer bolted straight to my SV620 gearbox.) However the output shaft is different, so you'll need the driveshaft as well (diff end is fine, flanges are the same.) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|