atari4x4 wrote:
nope.
Funny That - I wish you had told me before as I just adjusted mine last month for rego - Bugger
| auszookers.com https://auszookers.com/forum/ |
|
| Are the GV front bearings (bearing/hub assembly) adjustable? https://auszookers.com/forum/viewtopic.php?f=5&t=46429 |
Page 1 of 1 |
| Author: | TheOtherLeft [ Wed May 28, 2014 6:48 pm ] |
| Post subject: | Are the GV front bearings (bearing/hub assembly) adjustable? |
Hi guys, I have a bit of vertical play in my front wheels. The issue is that the bearings/hubs were replaced about 4 yrs ago. Could it have been installed incorrectly? Is there any adjustment in the bearings? It's on a 2002 SWB GV. Cheers guys. |
|
| Author: | klutched [ Wed May 28, 2014 6:54 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
Bearing sounds like it's stuffed, grab a new one off ebay for $50. |
|
| Author: | atari4x4 [ Wed May 28, 2014 6:57 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
nope. |
|
| Author: | TheOtherLeft [ Wed May 28, 2014 6:59 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
Bugger |
|
| Author: | tonyevans [ Sat May 31, 2014 1:31 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
atari4x4 wrote: nope. Funny That - I wish you had told me before as I just adjusted mine last month for rego - Bugger
|
|
| Author: | TheOtherLeft [ Sat May 31, 2014 3:11 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
tonyevans wrote: atari4x4 wrote: nope. Funny That - I wish you had told me before as I just adjusted mine last month for rego - Bugger How did you adjust them? |
|
| Author: | tonyevans [ Sat May 31, 2014 4:34 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
Took of the cover and lock ring, then did up the ring-nut to the specified toque, replaced the lock-ring and cover. |
|
| Author: | Chop [ Sat May 31, 2014 4:48 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
Hmmm bugger, if they ain't set to the right torque from the get go they may not last. |
|
| Author: | tonyevans [ Sat May 31, 2014 4:59 pm ] |
| Post subject: | Re: Are the GV front bearings (bearing/hub assembly) adjusta |
Nothing lasts for ever - But they sound fine at the moment. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|