Ill take pics and do a write up as I finish mine
| auszookers.com https://auszookers.com/forum/ |
|
| sierra auto conversion https://auszookers.com/forum/viewtopic.php?f=5&t=46445 |
Page 1 of 1 |
| Author: | MrRocky [ Fri May 30, 2014 10:33 am ] |
| Post subject: | sierra auto conversion |
Can someone link me to a comprehensive auto into sierra guide of sorts. Had a search but only got bits and bobs. |
|
| Author: | jdk81 [ Fri May 30, 2014 11:00 am ] |
| Post subject: | Re: sierra auto conversion |
Trail tough kit It has instructions and pretty good value. Gwagensteve provided info on alternative jackshaft mod Other things to sort out front drive shaft clearance - (try 1.0l solid shaft) Plug on top of filler/dipstick tube, to prevent leakage on angles shifter mods if desired Other things to make fit/work Shifter trans cooler Od and power buttons/lights rest for left foot Seating the torque coverter is covered on youtube and possibly fsm bolt the auto up to engine out of the car (its shitloads easier) With no lift I didnt have space to seat and install the auto while the engine was in. |
|
| Author: | MrRocky [ Fri May 30, 2014 12:38 pm ] |
| Post subject: | Re: sierra auto conversion |
Yeah mines lwb maruti so gbox xmember and some things are a bit oddball Iam aware of the trailtough kit just wanted to know if there was a step by step thread anywhere or an in depth build thread. Cheers. |
|
| Author: | jdk81 [ Fri May 30, 2014 1:11 pm ] |
| Post subject: | Re: sierra auto conversion |
Ill take pics and do a write up as I finish mine
|
|
| Author: | MrRocky [ Fri May 30, 2014 9:07 pm ] |
| Post subject: | Re: sierra auto conversion |
Awsome cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|