I've got to crawl under the fireball one evening this week and get some measurements for something, so can compare then if you want. But from memory its going to be no where near a match. First though, what and why?
| auszookers.com https://auszookers.com/forum/ |
|
| 2-piece yoke with saddle straps to fit sierra U-joints? https://auszookers.com/forum/viewtopic.php?f=5&t=46493 |
Page 1 of 1 |
| Author: | JrZook [ Mon Jun 02, 2014 4:18 am ] |
| Post subject: | 2-piece yoke with saddle straps to fit sierra U-joints? |
As the title suggests, does anyone know of a 2-piece yoke with right dimensions to suit a sierra style U-joint? The only 2 piece yokes I know of are on the heeps. Don't suppose anyone knows how far off they are to fitting? Dan |
|
| Author: | SierraDan [ Mon Jun 02, 2014 5:17 am ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
Try this http://www.hardyspicer.com.au/PDF_Files ... 3-14lr.pdf |
|
| Author: | Highway-Star [ Mon Jun 02, 2014 6:35 am ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
I've got to crawl under the fireball one evening this week and get some measurements for something, so can compare then if you want. But from memory its going to be no where near a match. First though, what and why?
|
|
| Author: | JrZook [ Mon Jun 02, 2014 10:52 am ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
Cheers Dan. Highway-Star wrote: First though, what and why? I'm thinking of trying to get rid of the underbody oil pump that is the gearbox/jack shaft slip yoke! A brass output bushing and u-joints, that poor oil seal never has a chance. I want to try and eliminate that slip yoke at the output for a fixed one and modify a tail-shaft with a slip to replace the jackshaft. For the idea to work Ill need a 2-piece yoke for the gearbox output shaft |
|
| Author: | tanshi [ Mon Jun 02, 2014 10:55 am ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
make one. do it in a similar way to the slip yolk eliminators, they use on xj cherokees |
|
| Author: | JrZook [ Mon Jun 02, 2014 10:57 am ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
That's the idea! No room for a flange on the output of the box hence Ill need a 2 piece yoke for that side. |
|
| Author: | tanshi [ Mon Jun 02, 2014 11:02 am ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
so your not wanting to shorten the jack shaft to do it? oh and wtf with deleting your facebook! whos gonna harrass me about efi on the 50 now?? |
|
| Author: | JrZook [ Mon Jun 02, 2014 1:38 pm ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
Mmmmmm? Jackshaft doesn't have a slip joint. Will have to use a shortened tailshaft instead. Ummm deactivated cause finishing thesis. Needed to remove sources of procrastination. Will hassle you when I'm done
|
|
| Author: | tanshi [ Mon Jun 02, 2014 1:41 pm ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
haha, and yet your on AZ
|
|
| Author: | JrZook [ Mon Jun 02, 2014 1:46 pm ] |
| Post subject: | Re: 2-piece yoke with saddle straps to fit sierra U-joints? |
 need to retain some sanity!
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|