| auszookers.com https://auszookers.com/forum/ |
|
| auto 1.3? https://auszookers.com/forum/viewtopic.php?f=5&t=4654 |
Page 1 of 1 |
| Author: | spw93_zuk [ Tue Apr 21, 2009 2:29 am ] |
| Post subject: | auto 1.3? |
is there an auto gear box that goes on to a 1.3L zook motor?? |
|
| Author: | want33s [ Tue Apr 21, 2009 1:01 pm ] |
| Post subject: | Re: auto 1.3? |
spw93_zuk wrote: is there an auto gear box that goes on to a 1.3L zook motor??
An adapter is available to mate a (vitara)1.6 to a manual from a (sierra)1.3 so I reckon with slight modification you could use it to mate a (sierra)1.3 to a (vitara)1.6 autobox. Jas. |
|
| Author: | tanshi [ Tue Apr 21, 2009 4:46 pm ] |
| Post subject: | Re: auto 1.3? |
if you can find one the jimny box will bolt straight up to the 1.3 block. |
|
| Author: | MUD-PIG [ Tue Apr 21, 2009 8:06 pm ] |
| Post subject: | Re: auto 1.3? |
tanshi wrote: if you can find one the jimny box will bolt straight up to the 1.3 block.
Are you sure about that....? Does that then mean a 5speed from a Sierra would bolt to a newer 1.3 Jimny motor...? |
|
| Author: | shep [ Tue Apr 21, 2009 8:39 pm ] |
| Post subject: | Re: auto 1.3? |
as long as it is a g13 it should |
|
| Author: | tanshi [ Tue Apr 21, 2009 8:40 pm ] |
| Post subject: | Re: auto 1.3? |
i should clarify, g13bb jimny box. m13s will not |
|
| Author: | joeblow [ Tue Apr 21, 2009 11:33 pm ] |
| Post subject: | Re: auto 1.3? |
tanshi wrote: if you can find one the jimny box will bolt straight up to the 1.3 block.
yes, but it will be a manual 'auto' as the electronics require the injection system of a g13bb in front of it. you could adapt a TRAUMATIC behind it........................................ but i'd much rather spend my time at the pub which is waht you will be thinking when the tri-matic packs up on the side of the road! |
|
| Author: | kenn [ Wed Apr 22, 2009 1:02 am ] |
| Post subject: | Re: auto 1.3? |
joeblow wrote: tanshi wrote: if you can find one the jimny box will bolt straight up to the 1.3 block. yes, but it will be a manual 'auto' as the electronics require the injection system of a g13bb in front of it. you could adapt a TRAUMATIC behind it........................................ but i'd much rather spend my time at the pub which is waht you will be thinking when the tri-matic packs up on the side of the road! Not to mention how slow it will be ,lugging all that iron around 
|
|
| Author: | spw93_zuk [ Wed Apr 22, 2009 1:06 am ] |
| Post subject: | Re: auto 1.3? |
cuz autos i find easer in the bush but i thin k i might just get a new hevy duity cluch:) |
|
| Author: | kenn [ Wed Apr 22, 2009 1:15 am ] |
| Post subject: | Re: auto 1.3? |
spw93_zuk wrote: cuz autos i find easer in the bush but i thin k i might just get a new hevy duity cluch:)
Don't get me wrong ,i have an auto in my car and fully agree with you .I just don't like TRAUMATIC'S . |
|
| Author: | spw93_zuk [ Wed Apr 22, 2009 1:40 am ] |
| Post subject: | Re: auto 1.3? |
yer i know wat you mean but wat motor you runn |
|
| Author: | joeblow [ Wed Apr 22, 2009 1:57 am ] |
| Post subject: | Re: auto 1.3? |
spw93_zuk wrote: yer i know wat you mean but wat motor you runn
for starters.............. yes, i know what you mean, but what motor do you run? please continue................. |
|
| Author: | kenn [ Wed Apr 22, 2009 2:14 am ] |
| Post subject: | Re: auto 1.3? |
1.6Vit EFI,Aisin Warner 4speed auto.. 
|
|
| Author: | atari4x4 [ Wed Apr 22, 2009 8:10 pm ] |
| Post subject: | Re: auto 1.3? |
want33s wrote: spw93_zuk wrote: is there an auto gear box that goes on to a 1.3L zook motor?? An adapter is available to mate a (vitara)1.6 to a manual from a (sierra)1.3 so I reckon with slight modification you could use it to mate a (sierra)1.3 to a (vitara)1.6 autobox. Jas. there would be some serious fab work involved, the vitara has the X~fer case on the back of the gearbox & the sierra is a divorced X~fer case. |
|
| Author: | kenn [ Wed Apr 22, 2009 10:25 pm ] |
| Post subject: | Re: auto 1.3? |
Yeah, a little bit of work, I'm running a Sierra transfer with a short jack shaft and a support bearing for the output of the auto. soon to be dual transfer. 
|
|
| Author: | joeblow [ Wed Apr 22, 2009 11:31 pm ] |
| Post subject: | Re: auto 1.3? |
deuling transfers?.......................................with swords? 
|
|
| Author: | blingdup [ Wed Apr 22, 2009 11:42 pm ] |
| Post subject: | Re: auto 1.3? |
What signal does the Jimny auto need from the injection to make it operate properly? I have a gti engine and wouldnt mind an auto behind it. What are these boxes like? |
|
| Author: | atari4x4 [ Wed Apr 22, 2009 11:48 pm ] |
| Post subject: | Re: auto 1.3? |
joeblow wrote: deuling transfers?.......................................with swords?
I challenge you to a dual or was that duel?? 
|
|
| Author: | kenn [ Thu Apr 23, 2009 11:57 am ] |
| Post subject: | Re: auto 1.3? |
Fixed ! |
|
| Author: | tanshi [ Fri Apr 24, 2009 9:35 pm ] |
| Post subject: | Re: auto 1.3? |
couldnt tell you what signals it will and wont need. Im putting my jimny box behind a 1.6 baleno. I would assume that if the ECU you have for the Swift has the pin outs for and auto box these will do it. People will tell you that they arent very strong. Incomparision to the AW4 they probably arent. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|