| auszookers.com https://auszookers.com/forum/ |
|
| 1L transfer case swap https://auszookers.com/forum/viewtopic.php?f=5&t=4676 |
Page 1 of 1 |
| Author: | cbzook [ Thu Apr 23, 2009 9:56 pm ] |
| Post subject: | 1L transfer case swap |
anyone put the 1L transfer case into the 1.3L zook.. wanting to know wat is needed to complete the transfer |
|
| Author: | Bruce [ Thu Apr 23, 2009 10:27 pm ] |
| Post subject: | Re: 1L transfer case swap |
If your 1.3 is a NT then straight swap. If it's a WT you will have to change the flanges off your 1.3 case onto the 1lt case. |
|
| Author: | wb800 [ Fri Apr 24, 2009 12:10 am ] |
| Post subject: | Re: 1L transfer case swap |
If its a transfer without a 4x4 light what do you do ? Can you drill the flanges |
|
| Author: | Built4thrashing [ Fri Apr 24, 2009 12:12 am ] |
| Post subject: | Re: 1L transfer case swap |
its not a staight swap at all unless you have a 1ltr box with the 4wd switch. To get it to fit you need to put the t/case ands of the 1ltr tailshafts on the end of your 1.3 shafts. can be done but the unis wont be as strong. I ran mine for ages untill i got some propper gears. B4T |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|