take it to suzistore in perth with a wad of cash & drive away. they've done it before & know all the tricks & could easily source you a motor too http://www.suzistore.com.au/
tell them know you know "alien" from auszookers & they'll hook you up.
| auszookers.com https://auszookers.com/forum/ |
|
| Jimny m18 conversion Perth https://auszookers.com/forum/viewtopic.php?f=5&t=46904 |
Page 1 of 1 |
| Author: | ricky87 [ Tue Jul 08, 2014 10:17 pm ] |
| Post subject: | Jimny m18 conversion Perth |
Hi all, I'm wanting to get the 1.8 in my 2008 jimny. Don't want to try do it myself, just want it done properly. Not sure where to start or who can help me. Work away so it sits around for 4 weeks at a time so plenty of time to get it done. Any help much appreciated |
|
| Author: | atari4x4 [ Tue Jul 08, 2014 10:21 pm ] |
| Post subject: | Re: Jimny m18 conversion Perth |
take it to suzistore in perth with a wad of cash & drive away. they've done it before & know all the tricks & could easily source you a motor too http://www.suzistore.com.au/ tell them know you know "alien" from auszookers & they'll hook you up.
|
|
| Author: | alien [ Tue Jul 08, 2014 10:46 pm ] |
| Post subject: | Re: Jimny m18 conversion Perth |
word to your mother. 
|
|
| Author: | ricky87 [ Wed Jul 09, 2014 7:47 am ] |
| Post subject: | Re: Jimny m18 conversion Perth |
Cheers. Alien u got any advise? Do u know the guys there? |
|
| Author: | alien [ Wed Jul 09, 2014 7:57 am ] |
| Post subject: | Re: Jimny m18 conversion Perth |
I do know them very well which is why everyone takes the piss =) Just take the jimny in and have a chat. The conversion won't be cheap but they do a good job and use genuine bits (if you ask them to). For a drive-in, drive-out a few days later solution i don't think there's a better option. |
|
| Author: | Bugsta [ Wed Jul 09, 2014 3:43 pm ] |
| Post subject: | Re: Jimny m18 conversion Perth |
Consider a clutch upgrade. If it's manual. Either to a HD clutch, or a Liana, if you can source a plate. |
|
| Author: | zukenutter [ Wed Jul 09, 2014 6:04 pm ] |
| Post subject: | Re: Jimny m18 conversion Perth |
X2 on the clutch upgrade. Mine has been slightly slipping when I accelerate hard. I'll be going for Liana flywheel and pressure plate when the time comes. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|