| auszookers.com https://auszookers.com/forum/ |
|
| 85 drover https://auszookers.com/forum/viewtopic.php?f=5&t=47125 |
Page 1 of 1 |
| Author: | Rod pool [ Thu Jul 24, 2014 3:42 pm ] |
| Post subject: | 85 drover |
Transfer case won't engage front drive shaft, get high/low ratio just doesn't engage the front, no obvious noise or clunking in the transfer case. Any suggestions? |
|
| Author: | Blkfxx [ Thu Jul 24, 2014 3:50 pm ] |
| Post subject: | Re: 85 drover |
Does the front shaft spin when in 4wd but the wheels don't have power? Check your locking hubs. |
|
| Author: | Rod pool [ Thu Jul 24, 2014 3:54 pm ] |
| Post subject: | Re: 85 drover |
No the shaft doesn't, I jacked it up and engage 4 wheel drive, if u turn the rear shaft it will turn the front by hand but the drive from the gearbox will only transfer through to rear shaft, FWH engaging / disengaging correctly |
|
| Author: | tanshi [ Thu Jul 24, 2014 4:00 pm ] |
| Post subject: | Re: 85 drover |
its clearly a transfer case front output issue. |
|
| Author: | Rod pool [ Thu Jul 24, 2014 4:07 pm ] |
| Post subject: | Re: 85 drover |
Costly job? Can it be DIY job |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|