40mm coil spacer lift only. 31s.
Some trimming on the rear of front wheel arch needed.
But tyre still slightly rubs on footwell on full lock.no big deal.
| auszookers.com https://auszookers.com/forum/ |
|
| vitara 2" lift and 31's https://auszookers.com/forum/viewtopic.php?f=5&t=47170 |
Page 1 of 1 |
| Author: | camskea [ Sun Jul 27, 2014 5:08 pm ] |
| Post subject: | vitara 2" lift and 31's |
Hey guys, I know the 31's will rub with only a 2" suspension lift but can someone tell me where? Front or back? Outer guard or on the inside? I'd like to grind whatever needs grinding before hitting the mud. thanks |
|
| Author: | henno [ Sun Jul 27, 2014 5:25 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
Blah blah suspension lift isn't for tyre clearance blah blah |
|
| Author: | camskea [ Sun Jul 27, 2014 6:29 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
Yes, I realise that. A body lift would give more clearance for larger tyres but even a 2" BL requires some grinding or hammering according to the research I've done. So with or without a BL, can anybody please answer my questions? |
|
| Author: | royce [ Sun Jul 27, 2014 6:41 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
Back of the front wheel arches will be bad, I think you'd need to hammer the inner arch quite a bit and possibly adjust the accelerator pedal rear of the rear arches, youll need to cut down the bumper, do something about the lip on the arch or fit really big bumpstop spacers and I think some of the bumper support gets in the way as well. I think its doable if you dont go crazy with offset but youll be cutting a lot |
|
| Author: | Jimmy! [ Sun Jul 27, 2014 6:50 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
40mm coil spacer lift only. 31s. Some trimming on the rear of front wheel arch needed. But tyre still slightly rubs on footwell on full lock.no big deal.
|
|
| Author: | camskea [ Sun Jul 27, 2014 7:21 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
Thanks guys. so less grinding / hammering if I put in some coil spacers?? |
|
| Author: | Gwagensteve [ Sun Jul 27, 2014 7:27 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
No, less grinding/hammering if you put in bumpstop spacers. Why is this the hardest thing in the world to understand? |
|
| Author: | Jimmy! [ Sun Jul 27, 2014 7:28 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
What do you have? 2" lift already? |
|
| Author: | SierraDan [ Sun Jul 27, 2014 7:29 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
Gwagensteve wrote: No, less grinding/hammering if you put in bumpstop spacers. Why is this the hardest thing in the world to understand? Because, 6" lifted wagon. |
|
| Author: | camskea [ Mon Jul 28, 2014 9:11 am ] |
| Post subject: | Re: vitara 2" lift and 31's |
That's what I said isn't it. 'Less' grinding with coil spacers. |
|
| Author: | Gwagensteve [ Mon Jul 28, 2014 9:30 am ] |
| Post subject: | Re: vitara 2" lift and 31's |
No, coil spacers will make zero difference to how much you have to grind. If the axle can reach the bumpstop- no change to how much grinding. Steve. |
|
| Author: | GeckoXL7 [ Mon Jul 28, 2014 9:58 am ] |
| Post subject: | Re: vitara 2" lift and 31's |
http://www.bits4vits.co.uk/store/vitara ... od_35.html |
|
| Author: | camskea [ Mon Jul 28, 2014 10:17 am ] |
| Post subject: | Re: vitara 2" lift and 31's |
Ok thanks. Thats a very clear explanation. |
|
| Author: | camskea [ Mon Jul 28, 2014 10:18 am ] |
| Post subject: | Re: vitara 2" lift and 31's |
Would you think I'm better off maybe just selling the 31's , and getting 30's or 29's? |
|
| Author: | camskea [ Mon Jul 28, 2014 10:45 am ] |
| Post subject: | Re: vitara 2" lift and 31's |
Just saw the bump stops. They look good. Are there any negatives to them? |
|
| Author: | Gwagensteve [ Mon Jul 28, 2014 12:18 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
Reduced overall wheel travel by the thickness of the bumpstop spacer, however, on the rear the spacers allow you to fit shocks with twice the extra travel of the thickness of the spacer- so in the rear you can gain overall travel by fitting bumpstop spacers. In the front you'll loose travel because longer struts would make the cvs fall apart. Steve. |
|
| Author: | GeckoXL7 [ Mon Jul 28, 2014 2:21 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
The chassy rail bellow is normally where it will first start scrubbing on anything above 29" with standard rims depending on tire width. 
|
|
| Author: | Reubs [ Mon Jul 28, 2014 5:48 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
^^^ my Vitara on 215/75r15 and standard rims rubs there... |
|
| Author: | DarkHorse [ Wed Oct 08, 2014 6:00 pm ] |
| Post subject: | Re: vitara 2" lift and 31's |
31s, 2" BL and 40mm susp lift, steering stops adjusted, slight hammering/cutting of arch lips and tub.   Annoyingly few photos, sorry... |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|