They definitely come with instructions and it shouldn't take you more than a couple of beers to get it done
If you don't get instructions, let me know. I have a fresh set I can copy for you
| auszookers.com https://auszookers.com/forum/ |
|
| How hard is it to install a ARB bull bar on a Jimny https://auszookers.com/forum/viewtopic.php?f=5&t=47354 |
Page 1 of 1 |
| Author: | Tyddy [ Sun Aug 10, 2014 11:21 pm ] |
| Post subject: | How hard is it to install a ARB bull bar on a Jimny |
Hey guys, I was thinking of putting an ARB bull bar on my car and was thinking of saving myself some money and installing it myself. I have done some research and found very little about how to install them over either how difficult it is to install them on a Jimny. I was hoping to hear some guys who have done it before about how difficult it is and also maybe bout how to do it or link me to a write up about installing them. Any help would be appreciated regards Ryan |
|
| Author: | Jezza86 [ Mon Aug 11, 2014 6:04 am ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
Do you have a drill and can you do up bolts. Its that easy |
|
| Author: | Tyddy [ Mon Aug 11, 2014 8:01 pm ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
Does it come with any instructions or is their a guide online at all would be nice to know where to drill etc |
|
| Author: | Jim_Aus [ Mon Aug 11, 2014 8:13 pm ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
nope.....and nope.. |
|
| Author: | Jezza86 [ Mon Aug 11, 2014 8:19 pm ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
http://auszookers.com/forum/viewtopic.php?f=5&t=22723 Theres a link to a black and white copy of the instructions. |
|
| Author: | Jezza86 [ Mon Aug 11, 2014 8:20 pm ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
This document |
|
| Author: | bone [ Tue Aug 12, 2014 8:04 pm ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
mine came with instructions, had to trim some plastic from memory (99 model). all in all really easy job. give it a whiiiiirl!! |
|
| Author: | Tyddy [ Wed Aug 13, 2014 9:13 pm ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
Awesome thanks for your help guys I gonna give it a whirl. |
|
| Author: | jimny_timmy [ Fri Aug 15, 2014 4:51 pm ] |
| Post subject: | Re: How hard is it to install a ARB bull bar on a Jimny |
They definitely come with instructions and it shouldn't take you more than a couple of beers to get it done If you don't get instructions, let me know. I have a fresh set I can copy for you |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|