Its not runny, it just like normal grease.
| auszookers.com https://auszookers.com/forum/ |
|
| Jimny Hubs and Steering Knuckle Help https://auszookers.com/forum/viewtopic.php?f=5&t=47420 |
Page 1 of 1 |
| Author: | NickCooper [ Fri Aug 15, 2014 6:18 pm ] |
| Post subject: | Jimny Hubs and Steering Knuckle Help |
Hi, My Jimny is having a few issues. It is a early 2005 model. The front passenger hub is not disengaging properly resulting in some loud strange noises every now and then. I want to replace them with something brand new (dont want to be putting vitara hubs etc. on it, want it to be a straight bolt on kit). I have been told that AVM have hubs that bolt straight on. Has anyone done this to a Jimny before? What other brands are available? Also, I have noticed grease on the passenger steering knuckle. I am lead to believe that they should be dry, and if not the a swivel hub rebuilt kit is needed. Is this true? Thanks Nick |
|
| Author: | Bugsta [ Fri Aug 15, 2014 8:50 pm ] |
| Post subject: | Re: Jimny Hubs and Steering Knuckle Help |
I believe Kyzer Mattingley did a straight hub swap. I think they were AVM's. Hub leak... Is it thick grease, or oily? |
|
| Author: | NickCooper [ Fri Aug 15, 2014 9:07 pm ] |
| Post subject: | Re: Jimny Hubs and Steering Knuckle Help |
Its not runny, it just like normal grease.
|
|
| Author: | Jezza86 [ Sat Aug 16, 2014 2:36 pm ] |
| Post subject: | Re: Jimny Hubs and Steering Knuckle Help |
Id say if its not moving its been for a swim after being overfilled with grease. Rebuild it fully and propery was everything and you should be laughing. |
|
| Author: | NickCooper [ Sat Aug 16, 2014 2:42 pm ] |
| Post subject: | Re: Jimny Hubs and Steering Knuckle Help |
Now that you mention it, it has been for a swim. 
|
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|