Can anyone tell me if it's possible to put a G16b out of a Baleno into a 91 MH Barina. If so what problems will i have. I intend if possible to buy a complete wreck to use for parts. Thanks guys please reply soon. George
| auszookers.com https://auszookers.com/forum/ |
|
| G16b into MH Barina https://auszookers.com/forum/viewtopic.php?f=5&t=47562 |
Page 1 of 1 |
| Author: | george16257 [ Wed Aug 27, 2014 2:37 pm ] |
| Post subject: | G16b into MH Barina |
| Can anyone tell me if it's possible to put a G16b out of a Baleno into a 91 MH Barina. If so what problems will i have. I intend if possible to buy a complete wreck to use for parts. Thanks guys please reply soon. George
|
|
| Author: | tanshi [ Wed Aug 27, 2014 2:39 pm ] |
| Post subject: | Re: G16b into MH Barina |
you realise this is a suzuki 4x4 forum right? how would be know about a barina, or care whats more? |
|
| Author: | Marko_SJ [ Wed Aug 27, 2014 2:40 pm ] |
| Post subject: | Re: G16b into MH Barina |
Big picture of a swift on the banner..... Maybe its time for AZ to broaden its appeal? |
|
| Author: | tanshi [ Wed Aug 27, 2014 2:44 pm ] |
| Post subject: | Re: G16b into MH Barina |
We have enough coily loving skirt wearing knob jockies already 
|
|
| Author: | bangn [ Wed Aug 27, 2014 2:55 pm ] |
| Post subject: | Re: G16b into MH Barina |
far easier and cheaper and more comfortable to buy a baleno. 95 glx dizzy type are mint cars and cheap as |
|
| Author: | Scrawny [ Wed Aug 27, 2014 2:57 pm ] |
| Post subject: | Re: G16b into MH Barina |
Could you shoe horn engine and gearbox in? Not sure how you'd go mating G16 to original box so that might be the only way. |
|
| Author: | JrZook [ Wed Aug 27, 2014 3:01 pm ] |
| Post subject: | Re: G16b into MH Barina |
Use a gearbox from a 5 door 1600 swift? |
|
| Author: | Scrawny [ Wed Aug 27, 2014 3:05 pm ] |
| Post subject: | Re: G16b into MH Barina |
JrZook wrote: Use a gearbox from a 5 door 1600 swift? I'm assuming Baleno and G16 Swift have the same gearbox? |
|
| Author: | Marko_SJ [ Wed Aug 27, 2014 3:14 pm ] |
| Post subject: | Re: G16b into MH Barina |
tanshi wrote: We have enough coily loving skirt wearing knob jockies already Yep. bangn wrote: far easier and cheaper and more comfortable to buy a baleno. 95 glx dizzy type are mint cars and cheap as Yep. What I'd do |
|
| Author: | atari4x4 [ Wed Aug 27, 2014 4:15 pm ] |
| Post subject: | Re: G16b into MH Barina |
Marko_SJ wrote: Big picture of a swift on the banner..... Maybe its time for AZ to broaden its appeal? What a terrible idea, we got enough window lickers as is... Last thing we need is the boost hektic GTI habib swift cruising tards. |
|
| Author: | Marko_SJ [ Wed Aug 27, 2014 8:59 pm ] |
| Post subject: | Re: G16b into MH Barina |
atari4x4 wrote: Marko_SJ wrote: Big picture of a swift on the banner..... Maybe its time for AZ to broaden its appeal? What a terrible idea, we got enough window lickers as is... Last thing we need is the boost hektic GTI habib swift cruising tards. Cant be worse than the jimny mob 
|
|
| Author: | ZookFan [ Wed Aug 27, 2014 9:01 pm ] |
| Post subject: | Re: G16b into MH Barina |
|
|
| Author: | its u its me [ Sat Sep 06, 2014 6:11 am ] |
| Post subject: | Re: G16b into MH Barina |
Head to redlinegti.com there is a wealth of information there on conversions and what Is required. It is a simple bolt in conversion if you use the G16B out of a swift sedan. You do have to raise the bonnet slightly though as the 1.6L head is slightly taller. You have to use the 1600 box to and front hubs, cv's etc. Using the 1600 box you will also need the gear shifter and all linkages as its a cable type. A entire car or a front cut is the easiest way to obtain all the parts you need. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|