auszookers.com :: View topic - Chassis height thread

auszookers.com https://auszookers.com/forum/

Chassis height thread https://auszookers.com/forum/viewtopic.php?f=5&t=47642	Page 1 of 1

Author:	pezz [ Tue Sep 02, 2014 6:22 pm ]
Post subject:	Chassis height thread
With all this talk of to high/to low Post it up rig: sj51 tyres: 33x9.5x15 bfg km1 height to bottom of chassy rail(not crossmember): 15 inches do you want it higher or lower: id like to drop a inch out of it

Author:	Zook_Fan [ Tue Sep 02, 2014 6:29 pm ]
Post subject:	Re: chassy height thread
Not chassis height but plenty of Info in here; viewtopic.php?f=5&t=24061&hilit=ute

Author:	monley [ Tue Sep 02, 2014 9:16 pm ]
Post subject:	Re: Chassis height thread
Rig:sj51T Tyres:33x12.5r15 mickey T claws Chassis height: 17.5" Height I would rather it be:16.5" At 99"wb I don't mind it been a bit taller for a better ramp over angle

Author:	scottiej [ Tue Sep 02, 2014 11:53 pm ]
Post subject:	Re: Chassis height thread
Rig: SJ50 Tyres: 33x12.50 maxxis buckshot Chassis height: 15.5" with flat belly Wheelbase: 82" Higher/lower: possibly raise it to 16"?

Author:	Zook_Fan [ Wed Sep 03, 2014 7:40 am ]
Post subject:	Re: Chassis height thread
Rig: GV Gen 1 Tyres: 35x12.5R16 Mickey Thompson MTZ Chassis height: 15" Wheelbase: 98" Height is about right, the body is too damn tall on these things. I'd like the chassis to be half inch higher and the roof to be 2 inches lower.

Author:	Red89 [ Wed Sep 03, 2014 3:47 pm ]
Post subject:	Re: Chassis height thread
My most favourite setup by far. rig: '89 WT tyres: 32x9.5x15 Pedes, measured 32.7, beadlocked 15x7 F100 rims and 1 inch wheel spacers height to bottom of chassy rail(not crossmember): 19 inches WB: 86 inches do you want it higher or lower: Was perfect, only ever felt unstable when climbing or decending steep steps so the fron or rear would tend to get a bit light however a longer WB would mean I would have bellied out.

Author:	monley [ Wed Sep 03, 2014 6:15 pm ]
Post subject:	Re: Chassis height thread
If you're bellying out on a 86" wb and 19" chassis height what chance do I have Might need 35s

Author:	atari4x4 [ Wed Sep 03, 2014 6:34 pm ]
Post subject:	Re: Chassis height thread
monley wrote: If you're bellying out on a 86" wb and 19" chassis height what chance do I have Might need 35s you'll be fine if you stick to the powerlines, alien drives it ALL on 31's & a swb.

Author:	3cyl [ Wed Sep 03, 2014 6:43 pm ]
Post subject:	Re: Chassis height thread
The LJ is 13.5" to the chassis rails (flat belly with belly plate at the same height) with a 77" wheelbase on 235/85r16 tyres. Sometimes it bellys, sometimes it rolls... If I change the ride height it will just make it do more of one and less of the other.

Author:	monley [ Wed Sep 03, 2014 7:01 pm ]
Post subject:	Re: Chassis height thread
atari4x4 wrote: monley wrote: If you're bellying out on a 86" wb and 19" chassis height what chance do I have Might need 35s you'll be fine if you stick to the powerlines, alien drives it ALL on 31's & a swb. This is my powerlines rig Wb:farking long Chassis height:3"s Perfect for Pl Needs moar spoa

Author:	SierraDan [ Wed Sep 03, 2014 7:24 pm ]
Post subject:	Re: Chassis height thread
It'd be SPOA. Spring over Arm!

Author:	Red89 [ Wed Sep 03, 2014 8:11 pm ]
Post subject:	Re: Chassis height thread
monley wrote: If you're bellying out on a 86" wb and 19" chassis height what chance do I have Might need 35s Definitely keen to see how yours goes a longer WB would possibly have helped me in some situations but not a loss in hieght. Harvey, Brunswick, Collie and the likes should be ok Mick and Ante seem to handle things pretty well, Birko did Bobs on 32's in his LWB, its just unfortunate I dont have access to the Toodyay property anymore. Here is one of a couple of vids/pics I have where it has got hung up on something on the belly.

Author:	MrRocky [ Wed Sep 03, 2014 9:31 pm ]
Post subject:	Re: Chassis height thread
Ive got 17" to bottom of chassis On 32"s that measure more like 33"s Standard lwb wb I have it setup quite stiff with the resting height quite high as its my daily i didnt want a boat at high speeds. I reckon i could prob drop 2" and soften it up a heap once its retired from daily duties. It does flex ok as long as im not going too fast, 4.1 diffs and 6:5s make it super slow and easy to manage

Author:	NomadGV03 [ Thu Sep 11, 2014 2:55 am ]
Post subject:	Re: Chassis height thread
2003 Grand Vitara Chassis Height: 12.5" (9.5" rear diff clearance, 10.5" Front diff) Wheels: 265/70R16 (31's) WB: 96.5" Higher/Lower: Would like it a few inches higher in diff clearance.

Author:	tanshi [ Thu Sep 11, 2014 8:11 am ]
Post subject:	Re: Chassis height thread
Nomad, you WB is the distance between your front and rear axle, not the distance side ways across your car. Spacers don't effect it. at 70 inches you would be shorter than my LJ

Author:	NomadGV03 [ Thu Sep 11, 2014 5:37 pm ]
Post subject:	Re: Chassis height thread
tanshi wrote: Nomad, you WB is the distance between your front and rear axle, not the distance side ways across your car. Spacers don't effect it. at 70 inches you would be shorter than my LJ Changed it, Thanks

Author:	jonno_racing [ Mon Sep 15, 2014 5:09 am ]
Post subject:	Re: Chassis height thread
rig: mg410 tyres: 34x9.5x15 tsl (more like 33) 2 inch ebay lift height to bottom of chassy rail(not crossmember): 15 inches do you want it higher or lower: 1 Iinch higer please

Author:	SierraDan [ Wed Sep 17, 2014 1:30 pm ]
Post subject:	Re: Chassis height thread
SJ70 33x10.5x15 Sagged 2" 14" to chassis. Would be happy if it dropped to 13". 82" WB

Author:	greenzook89 [ Fri Sep 19, 2014 11:30 pm ]
Post subject:	Re: Chassis height thread
Throwing a Coily up here for shits n giggles rig: SJ80 tyres: 235/75 Federal MT height to bottom of chassis rail(not crossmember): 14 inches do you want it higher or lower: I'd like one more inch

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/