auszookers.com
https://auszookers.com/forum/

NT to WT interior fitting. carpet.
https://auszookers.com/forum/viewtopic.php?f=5&t=47719		 Page 1 of 1
Author:  jazzziiiblack [ Tue Sep 09, 2014 12:05 pm ]
Post subject:  NT to WT interior fitting. carpet.
im looking at getting carpet and some body bolts and also sliders and flares from a NT and wondering if they will fit in my WT sj70??
Author:  Marko_SJ [ Tue Sep 09, 2014 12:09 pm ]
Post subject:  Re: NT to WT interia fitting
Having had both, but my NT was un carpeted: I'd say it will fit.

Flares, you might have to re-drill the metal tabs on the body work, I think they have different screw spacings. I also imagine sliders should change over but can't say for sure because my NT was LWB.

I looked around forever to find a set of NT flares.
Author:  jazzziiiblack [ Tue Sep 09, 2014 1:02 pm ]
Post subject:  Re: NT to WT interia fitting
the NT flares are actually the plastic type ones.
Author:  Zook_Fan [ Tue Sep 09, 2014 1:06 pm ]
Post subject:  Re: NT to WT interia fitting
Why would you want NT flares on a WT? They won't be wide enough to cover even the stock tyres.
Author:  bangn [ Tue Sep 09, 2014 1:22 pm ]
Post subject:  Re: NT to WT interia fitting
they did do the narrow track plastic flares which were the same size as widetrack flares..87-88 right on the crossover. I wouldn't be fitting up the plastic ones if you smash against things. They crack and smash easy. Same holes from memory.
Author:  Zook_Fan [ Tue Sep 09, 2014 1:26 pm ]
Post subject:  Re: NT to WT interia fitting
The plastic flares were the cross over WT flare on the 1988.5 model, I wouldn't say that they were NT flares at all considering they had WT diffs.
Author:  Marko_SJ [ Tue Sep 09, 2014 1:28 pm ]
Post subject:  Re: NT to WT interia fitting
Zook_Fan wrote:
The plastic flares were the cross over WT flare on the 1988.5 model, I wouldn't say that they were NT flares at all considering they had WT diffs.


They might mount the same, which is not helpful to the OP, who has a metal flare WT anywho.

But agreed.
Author:  Blkfxx [ Tue Sep 09, 2014 2:14 pm ]
Post subject:  Re: NT to WT interia fitting
FWIW WT flares won't bolt onto the spot welded bracket on a NT
Author:  jazzziiiblack [ Tue Sep 09, 2014 5:00 pm ]
Post subject:  Re: NT to WT interior fitting. carpet.
they are the bushwacker flares type flares so would be plently wide enough
Author:  sideways [ Tue Sep 09, 2014 5:15 pm ]
Post subject:  Re: NT to WT interior fitting. carpet.
FWIW 1981-84 1ls had different transmission tunnels so if it's from one of those then you might have issues with fitment.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/