| auszookers.com https://auszookers.com/forum/ |
|
| Rear drive train Noise 1997 Vitara https://auszookers.com/forum/viewtopic.php?f=5&t=47771 |
Page 1 of 1 |
| Author: | Lonelycruiser_au [ Sat Sep 13, 2014 4:00 pm ] |
| Post subject: | Rear drive train Noise 1997 Vitara |
I have a 1997 Vitara with Calmini suspension installed. Since I have purchased this little truck, I have experienced a whine comi9ng from the rear end. It mainly occurs when I back of at hi speed and under load. With the attempt to use process of elimination I have changed the tail shaft, gearbox and transfer case, and the rear diff. I unfortunately still have this whine. My thought's are it maybe the angle of the rear uni due to the lift. Has anyone had the same problem and how did you solve it. |
|
| Author: | atari4x4 [ Sat Sep 13, 2014 4:31 pm ] |
| Post subject: | Re: Rear drive train Noise 1997 Vitara |
pic of rear pinion angle & how far in/out is the heim joint wound... actually pics of both would help. |
|
| Author: | suzukiboy [ Sat Sep 13, 2014 6:04 pm ] |
| Post subject: | Re: Rear drive train Noise 1997 Vitara |
As atari4x4 said will be the rear pinion angle, I tried different adjustments but could not get rid of the noise. |
|
| Author: | Lonelycruiser_au [ Sat Sep 13, 2014 9:47 pm ] |
| Post subject: | Re: Rear drive train Noise 1997 Vitara |
I don't think there is anyway to adjust the angle of the diff. |
|
| Author: | atari4x4 [ Sat Sep 13, 2014 11:25 pm ] |
| Post subject: | Re: Rear drive train Noise 1997 Vitara |
what calmini kit 2" or 3"? the 3" is adjustable by screwing in/out the threaded rod end/heim joint/ rose joint on the upper link to adjust the pinion angle |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|