| auszookers.com https://auszookers.com/forum/ |
|
| baleno G16B conversion into sierra, coil wiring from ecu https://auszookers.com/forum/viewtopic.php?f=5&t=47913 |
Page 1 of 1 |
| Author: | strop [ Thu Sep 25, 2014 11:10 am ] |
| Post subject: | baleno G16B conversion into sierra, coil wiring from ecu |
hey every one just a quick question im doing the wiring on a G16B conversion into a Suzuki for a mate and just have a question about he coil, its a dizzy model and i have found the wire from the ecu to the coil but on my drawings it has an ignitor before the coil, am i missing something? thanks charlie |
|
| Author: | strop [ Thu Sep 25, 2014 11:40 am ] |
| Post subject: | Re: baleno G16B conversion into sierra, coil wiring from ecu |
what i should say is its the ignition trigger signal from the ecu i have but it goes to the ignitor which then goes to the ignition coil, i dont think i have the ignitor... |
|
| Author: | monley [ Thu Sep 25, 2014 2:51 pm ] |
| Post subject: | Re: baleno G16B conversion into sierra, coil wiring from ecu |
If it's a late model vit motor it's all built into the dizzy/coil what ever you want to call it. I couldnt find any diagrams that showed it with out the ignitor either. So no your not missing anything |
|
| Author: | strop [ Sun Sep 28, 2014 10:01 pm ] |
| Post subject: | Re: baleno G16B conversion into sierra, coil wiring from ecu |
It's a baleno motor, and it not all built in the dizzy, on my zook it is, was so much easier but an afternoon of prep we had it all done, I used a Vitara coil and ignitor and it worked on the baleno computer, only problem now is the timing on the dizzy. Mate bought the zook half way through a conversion and they have retrofitted some cap off something else and it looks like an ugly setup but he might have to nut it out haha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|