auszookers.com
https://auszookers.com/forum/

Need some Auszooker help!!! Jimny bonnet dimensions required
https://auszookers.com/forum/viewtopic.php?f=5&t=47916		 Page 1 of 1
Author:  its u its me [ Thu Sep 25, 2014 12:54 pm ]
Post subject:  Need some Auszooker help!!! Jimny bonnet dimensions required
Hi all.

I am currently living in Canada and loving it. But after missing zook life from back in oz after 12 months I have a decided on getting a Jimny sent from japan (importing to canada) so I will be flying the flag high for the auszookers crew as Jimnys were not available in the North American market. Can't wait to get the odd ball and curious looks from the local folk :peaceout:

I need some assistance though and hoping someone on here can quickly slap a tape measure over there standard Jimny Hood for me. I just need total width and length of 1998-2005 shape to check something before it arrives middle of next month.

It would be much appreciated.

Dave
Author:  atari4x4 [ Fri Sep 26, 2014 7:09 pm ]
Post subject:  Re: Need some Auszook help!!! Jimny Hood Dimensions Required
bump for halp a brother out.
Author:  zukenutter [ Fri Sep 26, 2014 7:30 pm ]
Post subject:  Re: Need some Auszook help!!! Jimny Hood Dimensions Required
1300mm wide x 850mm grill to cowl. Height of grill section is less than 280mm
Author:  atari4x4 [ Fri Sep 26, 2014 7:37 pm ]
Post subject:  Re: Need some Auszook help!!! Jimny Hood Dimensions Required
+ 11 internets to ^^^^ that guy. :wink:
Author:  zukenutter [ Fri Sep 26, 2014 8:34 pm ]
Post subject:  Re: Need some Auszook help!!! Jimny Hood Dimensions Required
Haha excellent, I needed some internets
Author:  its u its me [ Sun Sep 28, 2014 11:28 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Thanks Guys :peaceout:

You may ask why on earth I am asking for the jimmy bonnet dimensions? Well I am currently trying to determine is a JB23W 660cc bonnet will fit a 99 JB33W jimmy 1.3L.

What's the difference? The turbo 660cc model has a neat looking factory scoop for the top mount intercooler. It may not be for everyone but I love the look of it and feel it will be a nice little face lift to the zook and something to make it stand out from the crowd (a crowd of Jimnys back in OZ anyway).

There is basically no information about the 660cc jimmy on the net (other then stuff in Chinese!) but from what information I have found It very may well fit and simply be a straight bolt on mod.

The 660cc Japanese jimmy comes in 2 types

1) JB23 kie class turbo 660cc. This car I believe is a lot smaller in overall size to meet Japanese kei class size restrictions. Practically nothing from this car is interchangeable with the 'wide' model.

2) JB23W turbo 660cc 'wide' jimny. This car appears to be the wide track version that is the same chassis as the the JB33W onwards we get in Aus. The main visual difference is the car does not have the widen body flares and and flared ends on the front and rear bumpers to mate. Track width I believe is the same and many parts appear interchangeable obviously other then the drivetrain and motor.

I have determined that the JB33W and JB23W take the same windshield and the bonnet struts are the same.

I was given the dimensions by a contact in japan who stated the measurements of the 23W hood was "35cm high, 87cm length and 129cm". This is very close to the measurements zukenutter was kind enough to give. My main concern was width which I'm thinking that there is just a slight discrepancy on what part of the bonnet the width was measured.

A pic of a JB23W 660cc jimmy. Note it doesn't carry the muscle that the aus jimny has with the widen arch flares and wider bumpers

Image

Jb23W hood

Image

Underside structure of JB23W: looks very similar to the aus version
Image

Any thoughts?
Author:  its u its me [ Sun Sep 28, 2014 12:15 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Also for anyone interested here is a few pics of the new zook boarding the boat in japan for its long journey to Canada Armsup

Image

Image

Image
Author:  atari4x4 [ Sun Sep 28, 2014 12:29 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
if you get rid of those decals, you need to ban yourself from here. Armsup

the headlight treatment is a bit :?

oh and the bonnets look visually the same when checking points like where the guard, headlight, bonnet meet & the back corner by the A pillar looks the same.
Author:  its u its me [ Sun Sep 28, 2014 12:39 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Haha don't worry I intended the keep the graphics on there as long as they are in good shape. I think they most likely should be (fingers crossed) as the car only has 70,000kms on it.

As for the headlight styling. Agreed. But would you believe a lot of the ones I was bidding on had the same thing. I don't know if it's some type of factory styling in Japan or just crazy Japanese styling. Who knows.

Yeh I had a pic of a standard bonnet underside (can't find it now) and they look to have a lot of similarities.

I would love to know for certain but the only way I will truly find out is taking the punt and forking out for a jb23w hood and hoping for the best.

But if this is a bolt on mod it could be an option for you guys back home who dare to be different or who want to try and be 2014 jimny wannabes pompoms
Author:  zukenutter [ Sun Sep 28, 2014 1:31 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
My measurements were a bit "give'n'take" and the height I gave wasn't including the slope of the bonnet. I'd put money on a bet that the bonnets will match. I think up until the latest update the front clip has been consistent and the only variations has been in the grill options on some of the Japanese models.

Those headlight trims are just add ons, wouldn't imagine they'd be hard to remove.
Author:  watermouse [ Sun Sep 28, 2014 1:47 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
its u its me wrote:

Image



An oldie but a goodie.

What kind of hoops do you have to jump through importing into Canadia? Do you have to do a left-hand-drive conversion?
Author:  its u its me [ Mon Sep 29, 2014 2:48 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
thanks Zukenutter. I think between the 'give and take measurements' from both parties may just be the reason for the slight discrepancies. I'm not to concerned with the height. As the 600cc hood with the scoop should be (in theory) higher then the 1.3l hood anyhow so that seems to check out.

I'm feeling 95% confident that it will be a straight swap out. I think I'm going to throw the dice and grab a bonnet to be sent out also.

Watermouse. To be honest the Canadian import laws are so much more relaxed then back home. The only condition is the car must be at least 15 years to the day when it lands at Canadian customs. All cars in the province of Alberta (and most others I think) that are classified as a 'grey import' do not require conversion to left hand drive. I wouldn't attempt to go down the road of a lhd conversion on a car only worth a few thousand dollars.

Imports / rhd cars are becoming pretty popular here and i regular see the odd right hand drive getting around. The main condition is must be at least 15 years old. But things like the r34 gtr recently celbrated it's 15th birthday :mrgreen:

I would of been inclined to get a m13a type jimny but was limited to a g series due to the 15 year rule so can currently import up to a 1999 model. It was a very tough decision on deciding on another leafy Sierra or a jimny but opted for the jimny hoping for a little bit more reliability. It's a bit more 'car' then the Sierra, especially considering it will occasionally be getting around in -35 degrees! I would of loved a Sierra though as the parts available here is pretty good as lowrangeoffroad.com shop is only about 12 hour drive away from where I live. :peaceout: so this is my first jimny.

The whole thing that got me looking at imports was the fact that samurais (Sierras) and sidekicks / trackers (vitaras) here are just absolute rust buckets (winters are incredibly harsh on cars espec with all the salt on the roads) and are way over priced. I'm talking like 8k for a rusted 25 year old Sierra :rofl: so the choice to import something clean for same price or less was a no brainer. Just means going back to rhd.
Author:  zukenutter [ Mon Sep 29, 2014 7:40 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Don't forget to share pics when it arrives. There'll be a certain cool factor about having a Jimny over there, the Samurai guys will go nuts.
Author:  Seth2013 [ Wed Oct 01, 2014 1:11 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Congrats - hope it lives up to your expectations.

What the little blue box do?

Image
Author:  GraphicX [ Wed Oct 01, 2014 2:45 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
love the decals, i have a toy jimny with them on there;

Image
Author:  greenzook89 [ Wed Oct 01, 2014 4:12 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Seth2013 wrote:
Congrats - hope it lives up to your expectations.

What the little blue box do?



Probably one of the "super power earth" kits that the Japs are fond of.
Proven to be at least as effective as a Energy Polarizer :lol:
Author:  atari4x4 [ Wed Oct 01, 2014 4:20 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
greenzook89 wrote:
Seth2013 wrote:
Congrats - hope it lives up to your expectations.

What the little blue box do?



Probably one of the "super power earth" kits that the Japs are fond of.
Proven to be at least as effective as a Energy Polarizer :lol:



I lol'd, RIP Peter.
Author:  its u its me [ Thu Oct 02, 2014 7:14 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
I think greenzook89 is right. It looks like a grounding kit. Def good for an extra 20 horses :deadhorse:

Graphicx. I seen theses models on eBay. What is the quality like?
Author:  Marko_SJ [ Thu Oct 02, 2014 11:58 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
zukenutter wrote:
Don't forget to share pics when it arrives. There'll be a certain cool factor about having a Jimny over there, the Samurai guys will go nuts.


Or they'll hate it because its not a huge IFS "truck" with leather seats and literally 10 inches of lift for 35s.
Author:  Seth2013 [ Thu Oct 02, 2014 1:12 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
atari4x4 wrote:
greenzook89 wrote:
Seth2013 wrote:
Congrats - hope it lives up to your expectations.

What the little blue box do?



Probably one of the "super power earth" kits that the Japs are fond of.
Proven to be at least as effective as a Energy Polarizer :lol:



I lol'd, RIP Peter.


LOL, peter and his polarizer - I thought the Japanese would be smarter than that.
Author:  GraphicX [ Sun Oct 05, 2014 3:24 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
its u its me wrote:
I think greenzook89 is right. It looks like a grounding kit. Def good for an extra 20 horses :deadhorse:

Graphicx. I seen theses models on eBay. What is the quality like?


fairly ok, the upper shell is a pretty good replica, the lower bit is novelty, the kids love playing with it though but they broke the mirrors off.
Author:  its u its me [ Tue Oct 14, 2014 2:10 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Just an update. I have proceeded with having a 660cc turbo hood imported into Canada to bolt up to my jimny. Fingers crossed it's a straight swap out. :beer:

Will keep everyone posted
Author:  its u its me [ Tue Oct 14, 2014 2:16 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Marko_SJ wrote:
zukenutter wrote:
Don't forget to share pics when it arrives. There'll be a certain cool factor about having a Jimny over there, the Samurai guys will go nuts.


Or they'll hate it because its not a huge IFS "truck" with leather seats and literally 10 inches of lift for 35s.


I seen a truck as you described the other day with ridiculous lift. On the back window was a sticker that said

"Fat girls can't jump.....lift it"

Some of the trucks here are just crazy overkill but the sticker made me laugh!!
Author:  its u its me [ Sat Jun 13, 2015 1:09 pm ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Just to close this topic out..I can confirm a 600 cc turbo hood from a kei class turbo jb23w jimny is a direct bolt on mod.

Image
Author:  zukenutter [ Mon Jun 15, 2015 7:19 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
Thanks for the update
Author:  its u its me [ Mon Jun 15, 2015 8:13 am ]
Post subject:  Re: Need some Auszooker help!!! Jimny bonnet dimensions requ
zukenutter wrote:
Thanks for the update


Thanks for your help! :beer:
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/