auszookers.com https://auszookers.com/forum/
16x6 neg 18 wheels in japan https://auszookers.com/forum/viewtopic.php?f=5&t=48001	Page 1 of 1

---

Author:	Boova [ Sat Oct 04, 2014 4:11 pm ]
Post subject:	16x6 neg 18 wheels in japan
found these online and will try and get some over here from a mate in japan http://page19.auctions.yahoo.co.jp/jp/a ... parts_farm about $98 a wheel plus postage, will find out how much soon can run 225/75/16 MTs which are taller and thinner then 235 /15s but not as tall as 30's keen to hear your thoughts

---

Author:	Gwagensteve [ Sun Oct 05, 2014 8:51 am ]
Post subject:	Re: 16x6 neg 18 wheels in japan
Why are these heaps better than GV wheels? They seem a pretty good way to run 16's on a Jimny to me. this -19's will be poke out 17mm wider per side than GV rims which will, in my opinion, only complicate guard clearance and make the car more susceptible to death wobble. Steve.

---

Author:	SierraDan [ Sun Oct 05, 2014 9:23 am ]
Post subject:	Re: 16x6 neg 18 wheels in japan
The sweet alloys aren't much dearer.

---

Author:	sideways [ Sun Oct 05, 2014 8:57 pm ]
Post subject:	Re: 16x6 neg 18 wheels in japan
3cyl and co got a Chinese mob to make them up some 16x6s, from memory they were surprisingly cheap These guys I think. http://www.china4x4extreme.com/productL ... =28&big=28

---

Author:	epitam [ Wed Oct 08, 2014 5:25 pm ]
Post subject:	Re: 16x6 neg 18 wheels in japan
are the gv rims are +20 and are 6.5/7" width?

---

Author:	got_bar_work [ Wed Oct 08, 2014 7:01 pm ]
Post subject:	Re: 16x6 neg 18 wheels in japan
16x7 +10 I think

---

Author:	atari4x4 [ Wed Oct 08, 2014 7:09 pm ]
Post subject:	Re: 16x6 neg 18 wheels in japan
dun't youse cunce sirch enymore? Grand Vitara/XL-7 16" x 7" 5P

---

Author:	got_bar_work [ Thu Oct 09, 2014 1:34 am ]
Post subject:	Re: 16x6 neg 18 wheels in japan
I was Close

---

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/