| auszookers.com https://auszookers.com/forum/ |
|
| CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L https://auszookers.com/forum/viewtopic.php?f=5&t=48050 |
Page 1 of 1 |
| Author: | OFF-CHOPS [ Thu Oct 09, 2014 8:21 am ] |
| Post subject: | CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
Just received an email confirming that Calmini will be releasing a new line of Suspension Lift Kit for the "Sport" 1.8L, 2.0L Vitara's. This means those who own the sv420 (myself and a few others) and are looking for Lift kits. Will no longer have to look no further. They are expecting to release later on in this year! I know its not the best kit but, i'm told its the best bang for buck!  *fingers crossed all goes to plan!*
|
|
| Author: | atari4x4 [ Thu Oct 09, 2014 8:27 am ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
lol, don't hold your breath considering they've had that info for 8 years & the only thing that didn't fit on the original kit was the diff drops. |
|
| Author: | OFF-CHOPS [ Thu Oct 09, 2014 8:51 am ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
But a Kit specifically designed for the SV420 is great! Which means springs could possibly be better and struts. Rather than using the 1.6 kit which is designed to carry a apply to a different weight |
|
| Author: | henno [ Thu Oct 09, 2014 8:54 am ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
What is the difference in sprung weight between the 416 and 420 vits? It is much more than a carton of beer in the boot's worth of difference? |
|
| Author: | atari4x4 [ Thu Oct 09, 2014 8:58 am ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
lol this is calamari we're talking about... the struts will be junk, they'll still bind the coils to limit up travel, the rear of all SV's are identical to a SE & it's only the weight of the motor that requires the GV front springs. |
|
| Author: | OFF-CHOPS [ Thu Oct 09, 2014 9:16 am ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
atari4x4 wrote: lol this is calamari we're talking about... the struts will be junk, they'll still bind the coils to limit up travel  Too TrueBut it is a good place to start! Then you start chucking in commodore shocks, bumpstop extension and GV coils! <== See Atari I learnt how to use Search! |
|
| Author: | atari4x4 [ Thu Oct 09, 2014 9:23 am ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
|
|
| Author: | DarkHorse [ Thu Oct 09, 2014 12:12 pm ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
Don't forget the balljoints on the front... |
|
| Author: | OFF-CHOPS [ Thu Oct 09, 2014 12:42 pm ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
DarkHorse wrote: Don't forget the balljoints on the front... What was the problem with them? |
|
| Author: | Gwagensteve [ Thu Oct 09, 2014 3:25 pm ] |
| Post subject: | Re: CALMINI VITARA LIFT KIT "SPORT" 1.8L, 2.0L |
Sv20 arms have integral ball joints. You need to buy 1.6 ball joints and fit them to the Calmini arms. Steve. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|