auszookers.com
https://auszookers.com/forum/

Wt and nt transfer case
https://auszookers.com/forum/viewtopic.php?f=5&t=48089
Page 1 of 1

Author:  Rocco [ Sun Oct 12, 2014 6:24 pm ]
Post subject:  Wt and nt transfer case

G'day all.
Thanks for an interesting and very helpfull forum!
I've bought a 1990 sierra to race in the upcoming gascoyne dash and the transfer case has acted up.
4l and 4h work but only on the rear wheels, and 2h doesnt work at all.
I either have to rebuild or use a nt tx case that a mate has donated.
1) has anyone has similar issues?
2) will the nt tx fit?

Cheers
Rocco

Author:  Blkfxx [ Sun Oct 12, 2014 7:07 pm ]
Post subject:  Re: Wt and nt transfer case

Will be fine as long as it's a 1.3 NT case, Just swap the flanges from yours over since they have different PCD's.

Author:  Rocco [ Sun Oct 12, 2014 7:27 pm ]
Post subject:  Re: Wt and nt transfer case

Thanks for the reply.
I'll do the swop tomorrow.
Cheers

Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/