| auszookers.com https://auszookers.com/forum/ |
|
| Weber ..Charcoal Cannister Connection ?? https://auszookers.com/forum/viewtopic.php?f=5&t=48140 |
Page 1 of 1 |
| Author: | HarryHoudini [ Thu Oct 16, 2014 2:53 pm ] |
| Post subject: | Weber ..Charcoal Cannister Connection ?? |
Guys,we just fitted a 32 36 Weber to my Brothers Coily and was wondering what to do with the Charcoal Canister vacum line.Weber has only 1 Vacum inlet(Distributer) and i did not want to block the Canister line off as it apparently vents the Tank.Do i attach a t-piece to the Dizzy line or is there another way.? Any advice appreciated.TIA |
|
| Author: | HarryHoudini [ Sat Oct 18, 2014 8:50 am ] |
| Post subject: | Re: Weber ..Charcoal Cannister Connection ?? |
Anyone..?..someone must have done the Weber conversion on a Coily. |
|
| Author: | Built4thrashing [ Sat Oct 18, 2014 7:15 pm ] |
| Post subject: | Re: Weber ..Charcoal Cannister Connection ?? |
not many bother connecting the carbon canister |
|
| Author: | HarryHoudini [ Sun Oct 19, 2014 12:35 pm ] |
| Post subject: | Re: Weber ..Charcoal Cannister Connection ?? |
Thanks for reply,i was getting worried,do you block off the vacum line or leave it open?,i was worried about fuel tank breathing. |
|
| Author: | Rhinoman [ Sun Oct 26, 2014 5:09 am ] |
| Post subject: | Re: Weber ..Charcoal Cannister Connection ?? |
I would attach the breather to a small filter, you do need to vent the tank, then block off the vacuum pipe. The new Weber conversion has a pipe from the overflow to the charcoal canister to prevent the stalling issue, so you would need to keep that plumbed in. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|