| auszookers.com https://auszookers.com/forum/ |
|
| Drum to disc conversion question https://auszookers.com/forum/viewtopic.php?f=5&t=48280 |
Page 1 of 1 |
| Author: | mmiller6512 [ Thu Oct 30, 2014 5:02 pm ] |
| Post subject: | Drum to disc conversion question |
Need to know if I can use the parts from a W/T for the conversion to disks on my N/T Thanks All |
|
| Author: | losfer [ Thu Oct 30, 2014 8:32 pm ] |
| Post subject: | Re: Drums to Disk conversion question |
Thats a bit of a general question but i assume you mean a front disk conversion on an early sj40 which has drums on the front ? then yes you can . |
|
| Author: | mrw82 [ Fri Oct 31, 2014 5:35 am ] |
| Post subject: | Re: Drum to disc conversion question |
When putting disc in place of a drum setup you need to remove the residual pressure valve from the master cylinder. Christover done a write up with pics ages ago. Do a search for it and it'll give you all the info you need. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|