Here's the link to the FSM.
| auszookers.com https://auszookers.com/forum/ |
|
| Wheely annoying. https://auszookers.com/forum/viewtopic.php?f=5&t=4835 |
Page 1 of 1 |
| Author: | bigrig91 [ Wed May 13, 2009 8:22 pm ] |
| Post subject: | Wheely annoying. |
My rig is now screaming for some new wheel bearings in the front. any ideas where to get them on the north side of brissy for cheap or even on the internet?? any help would be good, apprentice wages dont really cover sierra expenses. cheers, brad. |
|
| Author: | mrw82 [ Wed May 13, 2009 8:39 pm ] |
| Post subject: | Re: Wheely annoying. |
www.onlineautoparts.com.au they are cheap and you can pick up from banyo. |
|
| Author: | bigrig91 [ Wed May 13, 2009 11:30 pm ] |
| Post subject: | Re: Wheely annoying. |
thanks heaps. any idea on how to put them in haha |
|
| Author: | Damo [ Thu May 14, 2009 12:33 am ] |
| Post subject: | Re: Wheely annoying. |
|
Here's the link to the FSM. |
|
| Author: | BLZUK [ Thu May 14, 2009 2:15 am ] |
| Post subject: | Re: Wheely annoying. |
haha gold |
|
| Author: | royce [ Thu May 14, 2009 2:16 am ] |
| Post subject: | Re: Wheely annoying. |
Coilies are different!!!!!!!!!!!!! |
|
| Author: | Saam [ Thu May 14, 2009 3:30 am ] |
| Post subject: | Re: Wheely annoying. |
THEY ARE !!! i ended up putting standard bearings back in for a whilebecause aftermarket where so shit. THEY WHERE STILL FUCKED SO I acutally ended up getting jimny bearing hubs on mine now because they are the same as coily sierra the WT sierra bearings i had installed flogged my bearing hubs out out SO the moral of the story is buy jimny bearings and they will fit and work on your coily. |
|
| Author: | Saam [ Thu May 14, 2009 3:42 am ] |
| Post subject: | Re: Wheely annoying. |
also coilies are the same as vitaras as far as removing the bearing hub EXCEpt vits don't have the driveshaft circlip Take manual locking hub cap off Take manual locking hub off take driveshaft circlip off (not sure if you need the circlip off first i forgotted) take four screws in the bearing ring retainer thingy (don't fuck these screws) take the retainer thingy off bash locking ring untill it come off (anti clockwise, don't bash the threaded holes) take locking ring off bash and wiggle the poo out of the bearing hub untill it comes off the stub axle take out bearing seal and BIG circlip on the back of the bearing hub press bash use vice, or ask nicely for the bearing to come out THEN stick it all back together and read up about about bearing preloading. POW |
|
| Author: | Saam [ Thu May 14, 2009 3:49 am ] |
| Post subject: | Re: Wheely annoying. |
 and if while you are doing it, it looks like this, your at the wrong end of the car ! lol i'm just having fun
|
|
| Author: | BLZUK [ Thu May 14, 2009 3:52 pm ] |
| Post subject: | Re: Wheely annoying. |
Ah so thats what that extra circlip was for haha If you dont have any idea on how to put them in i dunno if i would attempt it, can go horribly wrong if you fark it up |
|
| Author: | bigrig91 [ Fri May 22, 2009 8:49 pm ] |
| Post subject: | Re: Wheely annoying. |
i bought some new front wheel bearings today off onlineautoparts and they are 2 seperate bearings for each wheel. i have a 1997 sierra coily and i was wondering if anyone has changed them before? i was told today of someone that coily bearings are one big bearing instead of 2 seperates? any truth?. guess i will find out tomorrow. any help on installing them would be greatly appreciated. |
|
| Author: | BLZUK [ Fri May 22, 2009 11:10 pm ] |
| Post subject: | Re: Wheely annoying. |
Damo wrote:
And yes they are 2 bearings |
|
| Author: | Saam [ Sun May 24, 2009 3:53 am ] |
| Post subject: | Re: Wheely annoying. |
BLZUK wrote:
mine is one big bearing assembly |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|