| auszookers.com https://auszookers.com/forum/ |
|
| Seats. https://auszookers.com/forum/viewtopic.php?f=5&t=48379 |
Page 1 of 1 |
| Author: | bmugg [ Sun Nov 09, 2014 5:02 pm ] |
| Post subject: | Seats. |
Hi All, I am looking at getting the seats in the LJ50 redone. Is this the best thing to do or can i pick up some a different brand or seat pretty easy from a wreckers etc that will fit? Thanks for putting up with all the questions. |
|
| Author: | bumstein [ Tue Nov 11, 2014 11:10 am ] |
| Post subject: | Re: Seats. |
If it were me I'd have them redone at an upholsterers as long as they aren't completely screwed. Take them down for the upholsterer to have a look at and I'm sure they will give you a Good idea. Might be hard finding a good pair at a wreckers?? |
|
| Author: | 303zuke [ Fri Nov 14, 2014 12:23 am ] |
| Post subject: | Re: Seats. |
The uneven length mounting legs that form the base of the LJ seats are unique to LJ50/80/81. You won't find anything else to bolt in. The width of the seats are fairly narrow, too, so making up a base to mount another type of seat will have to be higher and either hang over the trans tunnel, or be offset towards the door. This is bearable in a softtop 50 or 80, but a pain in the hip with hard doors. Get the original frames recovered. You can go vinyl again, but my choice would be canvas. |
|
| Author: | bmugg [ Fri Nov 14, 2014 8:49 am ] |
| Post subject: | Re: Seats. |
Thanks for the advice!! I only have the frames, I did just build up with foam and put covers on but want to get something more permanent sorted. Off to find pricing on upholsterer's Thanks again. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|