auszookers.com • View topic

Board index » Talking About Stuff » Suzuki Talk

Plugs Fouling

Page 1 of 1

[ 4 posts ]

Print view

Previous topic | Next topic

Author

Message

bmugg

Joined: Tue Oct 28, 2014 12:31 pm
Posts: 12
Vehicle: Suzuki LJ50

Posted: Sat Nov 08, 2014 7:09 pm

Hi All,

This is a great site so many answers!! I am trying to figure out why my plugs would keep fouling. Could the huge hole in the exhaust be the reason or is it more likely something else?

Thanks

Scrawny

I live here!

Joined: Tue Jan 29, 2008 10:30 pm
Posts: 10528
Location: Brissie
Vehicle: Popemobile

Posted: Sat Nov 08, 2014 7:21 pm

LJ50? Too much 2 stroke oil?

bmugg

Joined: Tue Oct 28, 2014 12:31 pm
Posts: 12
Vehicle: Suzuki LJ50

Posted: Sat Nov 08, 2014 7:24 pm

Yes sorry it is an LJ50.

303zuke

az supporter

Joined: Wed Aug 19, 2009 11:30 pm
Posts: 2447
Vehicle: LJ50V, SJ70

Posted: Sun Nov 09, 2014 9:49 pm

What plugs are you using? NGK B7HS or Nippondenso W20-FSU should be fine. Lots of idling can lead to fouled plugs, go for a fast drive every now and again. Try NGK B6HS if fouling persists.

Is it all 3 cylinders that foul up, or just one or two? Could be an ignition issue, replace leads and/or cap.

You haven't fiddled with the oil pump actuating cable that goes to the carb, have you? It should be adjusted so that it just begins to open at the same time as the carb throttle plate.

And finally a dumb question. You're not running a fuel Pre-mix AS WELL as the oil injection?

Page 1 of 1

[ 4 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: No registered users and 72 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum