| auszookers.com https://auszookers.com/forum/ |
|
| jimny jonny joints https://auszookers.com/forum/viewtopic.php?f=5&t=48464 |
Page 1 of 1 |
| Author: | russty_2008 [ Mon Nov 17, 2014 3:47 pm ] |
| Post subject: | jimny jonny joints |
Has anyone put jonny joints in there jimny radius arms and where do I get some |
|
| Author: | want33s [ Mon Nov 17, 2014 3:52 pm ] |
| Post subject: | Re: jimny jonny joints |
I bought all mine from Currie Enterprises in USA. They are all imperial sizes so finding something to fit straight into jimny arms won't be easy. |
|
| Author: | Gwagensteve [ Tue Nov 18, 2014 2:44 pm ] |
| Post subject: | Re: jimny jonny joints |
You'd only want to install them at the chassis end where they won't make any difference to anything. If you install them at the axle end, you won't have any articulation. Steve. |
|
| Author: | russty_2008 [ Tue Nov 18, 2014 6:36 pm ] |
| Post subject: | Re: jimny jonny joints |
Has anyone done it on a jimny is it worth it |
|
| Author: | Gwagensteve [ Wed Nov 19, 2014 1:28 am ] |
| Post subject: | Re: jimny jonny joints |
I don't need to have done it to know there is no point. Fitting them at the axle end will increase bind, bracket breakage and axle housing twist, along with substantially reducing articulation. Fitting them at the chassis end won't improve articulation or roll stiffness and will increase road harshness and vibration transmitted into the car. I am aware suzuki recommend fitting stiffer bushes at the chassis end to reduce death wobble, but a jonny joint won't be required to do that. Add in the maintenance required on such a small joint in a location where it's getting blasted by road grime constantly.... it's an advantage how? |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|