| auszookers.com https://auszookers.com/forum/ |
|
| Are all uni joints the same on a sierra https://auszookers.com/forum/viewtopic.php?f=5&t=48471 |
Page 1 of 1 |
| Author: | joalnin [ Mon Nov 17, 2014 9:07 pm ] |
| Post subject: | Are all uni joints the same on a sierra |
Just had a bad experience at Repco today - they couldnt supply a full replacement of all the uni joints and couldnt tell me if all the uni joints are the same on a 92 sierra (they didnt have a listing for them all) Anyone help - are all (6) uni joints the same? And is there a better place to get the besides Repco (quality and cost for a daily driver sierra)? |
|
| Author: | sideways [ Mon Nov 17, 2014 9:19 pm ] |
| Post subject: | Re: Are all uni joints the same on a sierra |
Yes, just make sure you get unis for a 1.3l, 1ls have the clip in a different spot. Hit up 4WD_products, they'l know exactly what you're after. Alternatively, LROR has a good selection. |
|
| Author: | monley [ Mon Nov 17, 2014 10:34 pm ] |
| Post subject: | Re: Are all uni joints the same on a sierra |
I brought some uni joints the other day. They gave me the option of 23mm caps or 25mm caps |
|
| Author: | shep [ Tue Nov 18, 2014 6:40 am ] |
| Post subject: | Re: Are all uni joints the same on a sierra |
Internal or external circlips. Sierra 1.3 is external. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|