auszookers.com • View topic - Main bearing cap stiffeners

Board index » Talking About Stuff » Suzuki Talk

Main bearing cap stiffeners

Page 1 of 1

[ 3 posts ]

Print view

Previous topic | Next topic

Author

Message

redvitara

Joined: Thu Jul 04, 2013 8:50 am
Posts: 12
Vehicle: vitara se416

Posted: Wed Dec 17, 2014 9:05 am

I'm rebuilding my g16b at the moment & the manual I have shows main bearing cap stiffeners bolted to the bearing caps.
Don't recall taking them off before being sent away for machining.
Are other people using these in their motors? Should I source a set for mine?
Thanks
Redvitara

mnemonix

az supporter

Joined: Sun Aug 16, 2009 11:30 pm
Posts: 1409
Location: Newcastle NSW
Vehicle: '96 LWB trayback

Posted: Wed Dec 17, 2014 5:24 pm

I don't run one and have never had an issue with it.
There is some inconsistency between various G16a/b's and they don't all run them.

If you're not planning anything too extreme I wouldn't be at all concerned.

_________________
Twin charged twin cam twin locked webwheeler

christover1

az supporter

Joined: Tue Jul 15, 2008 11:30 pm
Posts: 8203
Location: Melbourne
Vehicle: Pajero 91 NH 3.0 SWB

Posted: Thu Dec 18, 2014 6:38 am

My Vit engine had a bearing cradle, but the Baleno donk I fitted didn't.
I chose to refit the Vits cradle to new engine, seemed wise.
Can't answer wether it is needed or not.
It looked like it would not fit in the Balenos sump shape, but I used the Vits anyway.

_________________
VIC ZOOK CLUB
http://www.vic.suzuki4wd.com/forum/

Page 1 of 1

[ 3 posts ]

Board index » Talking About Stuff » Suzuki Talk

Who is online

Users browsing this forum: Google [Bot] and 41 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum