| auszookers.com https://auszookers.com/forum/ |
|
| GV SQ420 front differential https://auszookers.com/forum/viewtopic.php?f=5&t=48504 |
Page 1 of 1 |
| Author: | aaronstevens [ Fri Nov 21, 2014 2:55 pm ] |
| Post subject: | GV SQ420 front differential |
G'day guys , just blow my front diff in my GV SQ420. Will a diff out of a GV H20A fit? |
|
| Author: | fordem [ Sat Nov 22, 2014 12:10 am ] |
| Post subject: | Re: GV SQ420 front differential |
Based on "research" using the parts manuals, I believe it will, and it is one of my considerations for getting rid of the problematic free wheel clutch mechanism - I haven't gotten around to actually fitting one though. You'll probably need to change the ring & pinion. |
|
| Author: | aaronstevens [ Sat Nov 22, 2014 6:42 am ] |
| Post subject: | Re: GV SQ420 front differential |
Thanks foredom , would I be better fitting a vitara diff ? As they are steel? |
|
| Author: | jdk81 [ Sat Nov 22, 2014 9:39 am ] |
| Post subject: | Re: GV SQ420 front differential |
What part blew? vit fronts are not steel gv manual 2.5l v6 front diffs are steel. Wrecker prices start at $500+ and have to be setup with your correct ring and pinion. Whats your diff ratio? I have a complete front diff with solid centre (no shitty air actuated centre) ratio is 4.625. it came from a 4 cyl 2.0l auto iirc |
|
| Author: | atari4x4 [ Sat Nov 22, 2014 12:48 pm ] |
| Post subject: | Re: GV SQ420 front differential |
no such thing as a GV with a H20a |
|
| Author: | fordem [ Sun Nov 23, 2014 1:00 am ] |
| Post subject: | Re: GV SQ420 front differential |
True that ^^^ - my earlier answer relates to the Sv620 aka the V6 Vitara estate. |
|
| Author: | aaronstevens [ Sun Nov 23, 2014 8:03 am ] |
| Post subject: | Re: GV SQ420 front differential |
The top of the centre blew , and split . How do I aquite the correct ring and pinion ? My diff ratio is 4.625:1. What are you doing with that diff jdk81? |
|
| Author: | aaronstevens [ Sun Nov 23, 2014 8:31 am ] |
| Post subject: | Re: GV SQ420 front differential |
And I thought the v6 2.5L grand vitara was running a H20A motor ?? I may be wrong though . So what front diff will fit into my? Any without changing the ring and pinion ? |
|
| Author: | ninjamoses [ Sun Nov 23, 2014 9:55 am ] |
| Post subject: | Re: GV SQ420 front differential |
The '20' in H20A stands for 2.0 litre - that was the motor fitted to the SV620 vitaras. The Grand Vitaras have a H25A (hence 2.5 litre). In regards to what diffs will fit, don't quote me but I don't believe there are any steel diff models from the factory that had 4.6 ratios. Manual GV and XL7s all had 4.3s, auto XL7s had 5.12s and I believe auto GVs had 4.8s. If you want a steel diff you will need to have the R&P swapped into one. If you just want a replacement alloy one, look for one off the same model car as you already have. The manual SV420 vitaras (96 - 98 models) also had 4.6 ratios as well. |
|
| Author: | atari4x4 [ Sun Nov 23, 2014 10:09 am ] |
| Post subject: | Re: GV SQ420 front differential |
^^^that and SV420 manual front diff will eliminate the air actuated front diff, but you might need the RHS CV to go with it. |
|
| Author: | aaronstevens [ Sun Nov 23, 2014 10:43 am ] |
| Post subject: | Re: GV SQ420 front differential |
Ahhh thanks guys , so I can change my R&P from my old alloy diff into a new steel diff ? Was looking at fitting a GV H25A manual diff . For the reason that I dont screw another alloy one ! Thanks for all the help ! |
|
| Author: | atari4x4 [ Sun Nov 23, 2014 10:52 am ] |
| Post subject: | Re: GV SQ420 front differential |
i would be surprised if your R&P survived unscathed. |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|