auszookers.com
https://auszookers.com/forum/

G16b into 1 litre Sierra
https://auszookers.com/forum/viewtopic.php?f=5&t=48510		 Page 1 of 1
Author:  angus350 [ Sat Nov 22, 2014 10:48 am ]
Post subject:  G16b into 1 litre Sierra
G"day.

I've got 1 litre tray back that I would like to put a 1.6 into, now before someone says sell it and start with a 1.3 I'm not going to be doing that, can't part with it lol

Anyway What's the difference in this conversion not being a 1.3 to begin with? I understand custom engine mounts will need to be made and somehow line them up,but will I also have trouble fitting a 5 speed Sierra box in the tunnel? Will I have problems with the dash/speedo fitting the vss ? Other issues ?

I have put a Gti motor into a Sierra before so im familiar with change overs but that was 1.3 to begin with and went Preety smoothly

Any help appreciated

Benn

Image
Author:  303zuke [ Sat Nov 22, 2014 5:55 pm ]
Post subject:  Re: G16b into 1 litre Sierra
These sorts of questions get asked a lot, it should be in the Noob section. viewtopic.php?f=5&t=42623

The conversion will depend on what SJ40 you have to start with.

Type 3 has the same Speedo gauge as the 1.3, so VSS install will be the same as for G16B into 1.3.

Type 1 or 2 will be an earlier type. You'd have to look and see if the VSS will fit or fab something up.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/