| auszookers.com https://auszookers.com/forum/ |
|
| Sierra windscreen thickness https://auszookers.com/forum/viewtopic.php?f=5&t=48553 |
Page 1 of 1 |
| Author: | suzukikid [ Tue Nov 25, 2014 5:57 pm ] |
| Post subject: | Sierra windscreen thickness |
Does anyone know how thick a sierra windscreen is? I had a bit of a lay down on the weekend and can't seem to find a windscreen surround anywhere! I have winch and snatch blocked the frame fairly well... Bent th doors back so the windows wind up... It's looking like I will have to make a template and get some laminated safety glass cut |
|
| Author: | greenzook89 [ Tue Nov 25, 2014 7:43 pm ] |
| Post subject: | Re: Sierra windscreen thickness |
Just measured my spare. 5mm thick. |
|
| Author: | bohuler [ Tue Nov 25, 2014 8:03 pm ] |
| Post subject: | Re: Sierra windscreen thickness |
Cheaper to buy windscreen from glass mob I'll get u a part # when im sober and at work 2mrw. |
|
| Author: | killazook [ Wed Nov 26, 2014 5:17 am ] |
| Post subject: | Re: Sierra windscreen thickness |
Have you looked on suzistores website they are pricey but you get a brand newy |
|
| Author: | tonyevans [ Wed Nov 26, 2014 5:47 am ] |
| Post subject: | Re: Sierra windscreen thickness |
I think the idea is his frame is no longer standard shape? |
|
| Author: | suzukikid [ Wed Nov 26, 2014 10:01 am ] |
| Post subject: | Re: Sierra windscreen thickness |
Cheers guys! Yeah tony that's it... I think it's close to normal but not worth buying a windscreen that doesn't fit.... I can't find a frame anywhere and when I do it's full of rust! I'm going to ring suzi store and piranha at the em of the week but ill sit down so when they tell me a price I don't fall over! |
|
| Author: | jdk81 [ Wed Nov 26, 2014 10:59 am ] |
| Post subject: | Re: Sierra windscreen thickness |
Theres a wt for $800 in mill parkon scumtree or ebay No motor or gearbox, but you could buy it for parts and part the rest out? |
|
| Author: | suzukikid [ Wed Nov 26, 2014 2:38 pm ] |
| Post subject: | Re: Sierra windscreen thickness |
It's sold! Haha have been all over everything and rang everyone (apart from piranha and suzi store) got onto one but its full of rust..... |
|
| Author: | got_bar_work [ Wed Nov 26, 2014 5:13 pm ] |
| Post subject: | Re: Sierra windscreen thickness |
Could weld up a rhs frame with a lip on it then just get a square piece cut Bound to happen again if its a toy car |
|
| Author: | suzukikid [ Wed Nov 26, 2014 7:24 pm ] |
| Post subject: | Re: Sierra windscreen thickness |
It's definatly a toy car! Haha I got a price from suzi store....350 plus postage plus paint plus windscreen... Will be about 600! Bugger that priced up glass and that will be 100.... Laminate safety glass is 6mm.... I think it should be right to go in the stock windscreen rubber? |
|
| Author: | Joshyboy26 [ Thu Nov 27, 2014 4:42 am ] |
| Post subject: | Re: Sierra windscreen thickness |
Itll be tight the windscreen is normally pretty fiddily to get in |
|
| Author: | Toughy [ Thu Nov 27, 2014 5:24 am ] |
| Post subject: | Re: Sierra windscreen thickness |
When I got a new windscreen for my lj the guy used my old one as a template and cut it out of the same thickness safety glass. You will need to make an accurate template. The guy that did it for me did a lot of hotrod custom screens, is in alexandra which is a fair trip for you for a screen. I imagine there would be someone closer to you though. You will need your frame to be flat no twist in it. Glass doesn't like to bend. |
|
| Author: | suzukikid [ Thu Nov 27, 2014 4:11 pm ] |
| Post subject: | Re: Sierra windscreen thickness |
Toughy yeah ill make a template! It's flat now after the winch work I did on it after looking at it tonight I think if I do a little bit more a stock screen will go in... But I think I would still rather go the template idea so I know 100% it's going to fit! Haha |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|