| auszookers.com https://auszookers.com/forum/ |
|
| GV 04 Stereo Options + Reverse Camera https://auszookers.com/forum/viewtopic.php?f=5&t=48706 |
Page 1 of 1 |
| Author: | mr2ns [ Wed Dec 10, 2014 1:31 pm ] |
| Post subject: | GV 04 Stereo Options + Reverse Camera |
GV 04 has factory deck. Looking for something decent to replace and that will incorporate a Reverse Camera. >Are there any branded (Alpine, Pioneer) decks with screen (for reverse camera) that fit in and replace factory two Din? >Does anyone have a reverse camera set-up on their GV - using either Rear View Mirror or Deck? I know you can buy the ebay convert to single Din Facia. I also dont want to use a cheapo ebay 7inch deck with gps etc, that break after after a years use. |
|
| Author: | henno [ Wed Dec 10, 2014 3:35 pm ] |
| Post subject: | Re: GV 04 Stereo Options + Reverse Camera |
Double-din do "fit" (the factory stereo is a double-din) but you will need to be mindful of depth of the unit as well as spending a few hours with a dremel and a lot of patience making the rounded corners in the silver HVAC surround/facia be able to accommodate a head unit with square corners. |
|
| Author: | murcod [ Thu Dec 11, 2014 1:26 pm ] |
| Post subject: | Re: GV 04 Stereo Options + Reverse Camera |
There's an old post on here somewhere with pictures of what can be done. It might be under XL-7 as (IIRC) they're the same only with the tacky woodgrain trim. |
|
| Author: | murcod [ Thu Dec 11, 2014 1:31 pm ] |
| Post subject: | Re: GV 04 Stereo Options + Reverse Camera |
Here you go: viewtopic.php?f=37&t=44284 For the reversing camera, I just bought a universal fit CCD camera that I fitted into the bumper skin above the number plate. It involved drilling a 22mm odd sized hole through the plastic bar, but gives an excellent view. (PS: CCD cameras tend to give better picture quality than CMOS; you can buy cheap cameras off Ebay that supposedly use Sony CCD's in them. Mine was around $25 delivered, it's similar to this one http://www.ebay.com.au/itm/New-Sony-CCD ... 25960eadf5 .) |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|