auszookers.com
https://auszookers.com/forum/

Jimny Shifter Linkage - Rebuild
https://auszookers.com/forum/viewtopic.php?f=5&t=48720		 Page 1 of 1
Author:  Hybrid [ Fri Dec 12, 2014 2:15 pm ]
Post subject:  Jimny Shifter Linkage - Rebuild
Anyone replaced the bushes for the shifter linkage? I looked at the FSM diagram but it's not real clear what the serviceable items are. Also can aftermarket replacement parts be sourced easily in Aus or will this be a dealership deal?
Author:  zukenutter [ Sun Dec 14, 2014 9:10 am ]
Post subject:  Re: Jimny Shifter Linkage - Rebuild
I assume we're talking about pre-2006 Jimny?
The two rear bushes (look like mini transfer bushes) are a simple replaceable item, the forward bush is pressed in. I've just packed this one with large diameter washes to remove the slack but makes it a lot more rigid.
Author:  zukenutter [ Sun Dec 14, 2014 9:12 am ]
Post subject:  Re: Jimny Shifter Linkage - Rebuild
Image
Author:  Hybrid [ Thu Dec 18, 2014 5:30 pm ]
Post subject:  Re: Jimny Shifter Linkage - Rebuild
Thanks for the help zukenutter. So the problem looks to be a whole lot worse now you posted that pic. I had an alignment done on it today and the shop handed me a part and said "pretty sure this fell out from your car". It looks a hell of a lot like the black link in your pic. It's sheared off at the end opposite the through bolt with what looks like part of a plate bracket still attached. I'll try to get a pic up when the rain stops. Thing is I can still change gears :/. It's just not real positive.
Page 1 of 1 All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/