Thanks man will look into the trimming
| auszookers.com https://auszookers.com/forum/ |
|
| 6.5.1 reduction gearing fitting into a 1ltr transfer case https://auszookers.com/forum/viewtopic.php?f=5&t=49035 |
Page 1 of 1 |
| Author: | narrowzooker [ Sat Jan 17, 2015 8:26 pm ] |
| Post subject: | 6.5.1 reduction gearing fitting into a 1ltr transfer case |
Hey guys wondering can I fit 6.5.1 reduction gearing into the light switch 1ltr transfercase I have been told it can be done as the 1.3 leafy and 1ltr cases are the same and the 6.5.1 gears replace all the gears in the transfer case so it will work is this true please help |
|
| Author: | 303zuke [ Sun Jan 18, 2015 2:56 am ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Yup, will work fine. You may need to trim a little inside the case to clear the gears, exactly as is required for a 1.3 install. |
|
| Author: | narrowzooker [ Sun Jan 18, 2015 11:37 am ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Thanks man will look into the trimming
|
|
| Author: | pezz [ Sun Jan 18, 2015 5:58 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Id be happy to swap you a 1.3ltr case for your 1ltr case |
|
| Author: | boostedbrick [ Sun Jan 18, 2015 7:06 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Sell your 1ltr for heaps($300 last one I sold), purchase a 1.3 case($50 for the last one I brought), fit the gears. Ive never had to make clearance for gears but maybe you will, depending on the case. |
|
| Author: | narrowzooker [ Sun Jan 18, 2015 9:51 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Will see how I go if it's not a good fit I'll swap u my spare one with some cash my way? |
|
| Author: | jdk81 [ Sun Jan 18, 2015 10:15 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
I wouldnt get too dreamy about extra cash In my opinion 1.0l cases arent in huge demand any more. Currently really struggle to get $150-$175. $300 is a lot of coin relative to the current cost of much better gears etc. And then the receiver is putting 1.0l flanges on a 1.3 case. So that old case which gets swapped out becomes worth a lot less. Costs a lot of coin for 12% reduction in high/low. 1.3 cases with wt flanges sell quick and are in highest demand nt drum brakes are in low demand, which keeps the nt flange cases steady cases without flanges are very cheap |
|
| Author: | narrowzooker [ Sun Jan 18, 2015 11:17 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
I don't care if I don't get money haha I'm going to see if the gears fit if not I'll get a 1.3 case not fussed |
|
| Author: | SierraDan [ Mon Jan 19, 2015 9:32 am ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Gears will fit. |
|
| Author: | MrRocky [ Mon Jan 19, 2015 9:53 am ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
In w.a. 1ltr case goes for about $300 same as a normal case Or $7-800 at a wrecker. East is uber cheap by comparison |
|
| Author: | SierraDan [ Mon Jan 19, 2015 9:55 am ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
That's retarded. No individual part on a Suzuki is worth more than $200 |
|
| Author: | MrRocky [ Mon Jan 19, 2015 11:51 am ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Try buy a straight wt bonnet in perth Guys try to sell unrego rollers with no motors for 2k + W.a. sucks dic for cars and parts |
|
| Author: | narrowzooker [ Mon Jan 19, 2015 3:25 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
I got a bonnet 50 bucks two dents |
|
| Author: | narrowzooker [ Mon Jan 19, 2015 4:53 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
I got a bonnet 50 bucks two dents |
|
| Author: | pezz [ Mon Jan 19, 2015 6:00 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Onlh willing to straight swap as I have a excess of 1.3 cases, but no 1ltr cases. in saying that, I have no use for one either |
|
| Author: | boostedbrick [ Mon Jan 19, 2015 6:20 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
A case is worth what someone is willing to pay, same for any part on a sierra. IF your not in a position to make some cash dealing for a 1.3 case, or generally don't give a fuck then fit the gears. IF you think any single part on a sierra is not worth more than $200, your dreaming mate. |
|
| Author: | SierraDan [ Mon Jan 19, 2015 6:30 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
|
|
| Author: | narrowzooker [ Mon Jan 19, 2015 7:11 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Why do my posts always turn into a fight or go waaayyyyy off topic haha |
|
| Author: | 303zuke [ Tue Jan 20, 2015 3:49 am ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Go ahead and fit the gears. The old 1.0lt gears you take out won't be ruined, they'll still be perfectly usable for someone to fit into a 1.3 case, and you might be able to sell the gears alone for $50-$100. Or put them in a box and re-install them if you get the poos with the 6.5 ratio. |
|
| Author: | narrowzooker [ Tue Jan 20, 2015 2:50 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
Nah I can't missing teeth off of some of the gears haha massive clunking |
|
| Author: | Marko_SJ [ Tue Jan 20, 2015 3:37 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
narrowzooker wrote: Why do my posts always turn into a fight or go waaayyyyy off topic haha People enjoy being cunts? 
|
|
| Author: | masterA [ Thu Jan 22, 2015 9:15 pm ] |
| Post subject: | Re: 6.5.1 reduction gearing fitting into a 1ltr transfer cas |
You will need to trim the inside of the case if you're putting 6.5s |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|