auszookers.com :: View topic

when rebuilding a 1.6 bottom end to use with a 1.3 head do i need to get a 1.3 or 1.6 gasket kit?
do i need to use a 1.6 or .13 head gasket?

Cheers
Mike

I just rebuilt a 16V 1.6 with 1.3 8V head.
I bought a 16V gasket set and could only use from head gasket down. Had to buy rocker cover, inlet and exhaust gaskets to suit a 1.3 seperately.

If anyone wants what is basically a 16V VRS set minus head gasket, let me know.

That's got all the valve stem seals right? How much?

Author:	Mike [ Wed May 20, 2009 5:22 am ]
Post subject:	1.6/1.3 gaskets
when rebuilding a 1.6 bottom end to use with a 1.3 head do i need to get a 1.3 or 1.6 gasket kit? do i need to use a 1.6 or .13 head gasket? Cheers Mike

Author:	Damo [ Wed May 20, 2009 12:06 pm ]
Post subject:	Re: 1.6/1.3 gaskets
Mike wrote: when rebuilding a 1.6 bottom end to use with a 1.3 head do i need to get a 1.3 or 1.6 gasket kit? do i need to use a 1.6 or .13 head gasket? Cheers Mike I'd use the gasket to suit the bore size you have, in your case most likely 1.6 gasket. 1.3 uses a 74mm piston and a 75mm bore gasket, 1.6 uses a 75mm piston and 76mm bore gasket. Oh, and FWIW, 1.6 and 1.3 heads (8v) are the same except for valve sizes, so the head doesn't really make any difference anyway.

Author:	want33s [ Wed May 20, 2009 12:28 pm ]
Post subject:	Re: 1.6/1.3 gaskets
I just rebuilt a 16V 1.6 with 1.3 8V head. I bought a 16V gasket set and could only use from head gasket down. Had to buy rocker cover, inlet and exhaust gaskets to suit a 1.3 seperately. If anyone wants what is basically a 16V VRS set minus head gasket, let me know.

Author:	Damo [ Wed May 20, 2009 1:28 pm ]
Post subject:	Re: 1.6/1.3 gaskets
want33s wrote: I just rebuilt a 16V 1.6 with 1.3 8V head. I bought a 16V gasket set and could only use from head gasket down. Had to buy rocker cover, inlet and exhaust gaskets to suit a 1.3 seperately. If anyone wants what is basically a 16V VRS set minus head gasket, let me know. That's got all the valve stem seals right? How much?

Author:	want33s [ Wed May 20, 2009 1:39 pm ]
Post subject:	Re: 1.6/1.3 gaskets
Damo wrote: That's got all the valve stem seals right? How much? Yep, valve stem seals, rocker cover, inlet, exhaust, 4 larger rubbers that I think seal the plugs(not sure.. never checked out a 16V head) and a few other bits.. I dunno...Full set cost $120 I didn't even use half of it.. How does $40 sound?

auszookers.com https://auszookers.com/forum/

1.6/1.3 gaskets https://auszookers.com/forum/viewtopic.php?f=5&t=4904	Page 1 of 1

Author:	Scrawny [ Wed May 20, 2009 1:45 pm ]
Post subject:	Re: 1.6/1.3 gaskets
Grab it Damo!!

Author:	11_evl [ Wed May 20, 2009 3:22 pm ]
Post subject:	Re: 1.6/1.3 gaskets
im keen jason

Author:	want33s [ Wed May 20, 2009 3:32 pm ]
Post subject:	Re: 1.6/1.3 gaskets
11_evl wrote: im keen jason SOLD. PM sent.

Author:	Damo [ Wed May 20, 2009 3:55 pm ]
Post subject:	Re: 1.6/1.3 gaskets
Bugger! Let me know if it falls thru.

Page 1 of 1	All times are UTC + 9:30 hours
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/