| auszookers.com https://auszookers.com/forum/ |
|
| help again https://auszookers.com/forum/viewtopic.php?f=5&t=49047 |
Page 1 of 1 |
| Author: | kdalton [ Mon Jan 19, 2015 10:45 am ] |
| Post subject: | help again |
im new to this Suzuki forum and I have stuffed my ankle up so im lying on the lounge for a few days and asking all the questions about my new sierra on my sierra I have 235/75r15 tyres .and the difference between stock tyres is 10%.so on my speedo doing 80km/hr im actually doing 88km/hr is that right.and is it easy to reset the speedo. and odometer.thanks |
|
| Author: | Gwagensteve [ Mon Jan 19, 2015 11:12 am ] |
| Post subject: | Re: help again |
Yes and no, to each question in order. |
|
| Author: | alien [ Mon Jan 19, 2015 12:06 pm ] |
| Post subject: | Re: help again |
You can take the instrument cluster to a specialist who can calibrate it to read correctly. I had this done on mine to pass engineering. The spring needs to be lengthened by just the right amount. |
|
| Author: | got_bar_work [ Mon Jan 19, 2015 2:57 pm ] |
| Post subject: | Re: help again |
You can get a gearbox that screws between the transfer and the speedo cable |
|
| Author: | kdalton [ Mon Jan 19, 2015 4:13 pm ] |
| Post subject: | Re: help again |
were do you get them from. cheers |
|
| Author: | got_bar_work [ Mon Jan 19, 2015 4:22 pm ] |
| Post subject: | Re: help again |
Calibration specialists. Ask a engineer where he uses I used namiss in Newcastle. http://www.gauge-shop.com.au/ |
|
| Author: | kdalton [ Mon Jan 19, 2015 4:41 pm ] |
| Post subject: | Re: help again |
im after the gearbox to change the speedo.cheers |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|