| auszookers.com https://auszookers.com/forum/ |
|
| Vitara Carby into Sierra 1.3 https://auszookers.com/forum/viewtopic.php?f=5&t=4914 |
Page 1 of 1 |
| Author: | Shaunoszuk [ Thu May 21, 2009 4:23 pm ] |
| Post subject: | Vitara Carby into Sierra 1.3 |
Hi all, Just wondering what is involved in replacing a sierra 1.3 carby with a Vitara carby ? I assume you would need a converter or something? Has anyone done this ? I got a vit carby lying around doing nothing and though i might give it a go! |
|
| Author: | joeblow [ Thu May 21, 2009 4:49 pm ] |
| Post subject: | Re: Vitara Carby into Sierra 1.3 |
do a search on the posts i've made. i'm sure i've done a small write up somewhere. |
|
| Author: | Shaunoszuk [ Sat May 23, 2009 4:31 am ] |
| Post subject: | Re: Vitara Carby into Sierra 1.3 |
Had a go tonight, but failed miserably. have a coolant hose with nowhere to go and the electric plugs did not match. Dont have a test light at the moment to try and work out the electrics and cant for the life of me work out how i have an extra hose with nowhere to go. Surely someone else out there has done this themselves and have some tips for a wannabe mechanic like myself!!! Dont know what model vitara the carby is off and cant seem to attach any photos. |
|
| Author: | steve [ Sat May 23, 2009 10:33 am ] |
| Post subject: | Re: Vitara Carby into Sierra 1.3 |
I don't think you'll get any benefit from doing it? Are you using the 1.6 carby manifold aswell coz they are slightly different in the hole sizes where the carby meets the manifold. |
|
| Author: | something_else [ Sat May 23, 2009 11:38 am ] |
| Post subject: | Re: Vitara Carby into Sierra 1.3 |
joeblow wrote: do a search on the posts i've made. i'm sure i've done a small write up somewhere.
check in my webber thread theres some good info in there |
|
| Author: | shep [ Sat May 23, 2009 2:24 pm ] |
| Post subject: | Re: Vitara Carby into Sierra 1.3 |
i put a sierra carby on a g16 and just had to blank off a couple of vac and coolant lines. |
|
| Author: | royce [ Sat May 23, 2009 3:27 pm ] |
| Post subject: | Re: Vitara Carby into Sierra 1.3 |
yeah the sierra manifold has an extra bypass hose setup thats not part of the vit carb, I remember making a sierra carb fit a 1.6 once and there was somehting left to block off like Steve said, bung the manifold on too, will help a lot |
|
| Page 1 of 1 | All times are UTC + 9:30 hours |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|